The design and behavior of a ductile structural system called a knee-braced moment frame are presented in this paper. The design of this structural system is based on a capacity-design concept that results in ductile behavior. The knee part is a fuse-like component that dissipates energy by the formation of plastic flexural and/or shear hinges at its ends and mid-span, when the building is subj...

Work has been carried out to investigate the flexural properties of composites made by reinforcing banana and pineapple as the new natural fibers into epoxy resin matrix. The natural fibers were extracted by retting and manual process. The composites are fabricated using banana and pineapple fiber reinforcements. Hybrid composites were prepared using banana/pineapple fibers of 0/40, 15/25, 20/2...

This study presents the results of an experimental program to investigate the effectiveness of an innovative combined FRP technique using combination of externally bonded (EB) FRP fabrics and near surface mounted (NSM) FRP rods for flexural strengthening of existing reinforced concrete (RC) two-wayslabs with low clear cover thickness. Three full-scale RC slabs (1500×1500×120 mm) were tested und...

Three methods for analyzing azimuthal anisotropy from cross-dipole logs are applied to data from the Powder River Basin in Wyoming. These techniques are based on the phenomena of flexural wave splitting in anisotropic materials and are analogous to the techniques used for VSP data processing. The four-component cross-dipole logging data obtained with a Schumberger tool from a vertically-fractur...

Telecommunication towers are among the few steel structures that little attention has been paid to their seismic behavior in existing design codes. Due to lack of design provisions, the designers apply the existing building design codes to telecommunication towers. However, the seismic behavior and response of telecommunication towers is very different from that of building structures. For exam...

OBJECTIVE Repairing composite restorations may be a more conservative treatment than replacing the entire restoration. The objective of this in vitro study was to determine the best repair method by measuring flexural, diametral tensile, and shear bond strength of repaired composites in which the surfaces were treated with chemical primers (Add & Bond or Silane Bond Enhancer), a bonding agent (...

In a Z-core sandwich panel, the shear stiffness of the sandwich panel in the weak direction which is perpendicular to the placement of the Z-cores is much smaller than the bending stiffness because the hollow section between the two facing plates cannot sustain shear action. Because of this fact, the shear deformation of a Z-core sandwich panel under bending in the weak direction cannot be igno...

A microcantilever based method for fluid viscosity and mass density measurements with high temporal resolution and microliter sample consumption is presented. Nanomechanical cantilever vibration is driven by photothermal excitation and detected by an optical beam deflection system using two laser beams of different wavelengths. The theoretical framework relating cantilever response to the visco...