For efficient use of water, accurate measurement of flow in (field/laboratory) channels is required for many water resource projects. The present work is aimed to study the flow characteristics of a twin plate weir (two sharp-crested plates are placed one behind the other at some distance) under free and submerged flow conditions. Experiments are performed with four spacing of the twin plate we...

Synthetic photochemistry carried out in classic batch reactors has, for over half a century, proved to be a powerful but under-utilised technique in general organic synthesis. Recent developments in flow photochemistry have the potential to allow this technique to be applied in a more mainstream setting. This review highlights the use of flow reactors in organic photochemistry, allowing a compa...

For establishing hydrate-based technologies for natural-gas storage/transport, CO2 capture from industrial flue gases, etc., we need appropriate guidelines for the scale-up of hydrate production/processing equipment from laboratory scales to industrial scales. This paper aims to provide technical remarks on the scale-up of hydrate-forming reactors, the central components of hydrate production/p...

A genetic algorithm is used to optimize the modified benzene alkylation process. Based on the previous studies, the modified process increases ethylbenzene selectivity and decreases energy consumption at the same time. The inlet ethylene flow rate of each alkylation reactor is optimized in order to reduce the chance of transalkylation reactions but increase ethylbenzene selectivity. The byprodu...

Vegetation growing in the water along rivers plays an important role on the hydrodynamic behavior, on the ecological equilibrium and on the characteristics of the river. It has effects on the flow resistance and, as a result, has a large impact on water levels. The influence of non-submerged vegetation on flow is not so clear as yet; it needs to be further studied. The Acorus Calmus L is a kind...

Power production of four hydraulically connected microbial fuel cells (MFCs) was compared with the reactors operated using individual electrical circuits (individual), and when four anodes were wired together and connected to four cathodes all wired together (combined), in fed-batch or continuous flow conditions. Power production under these different conditions could not be made based on a sin...

The turbulent flow field generated in a baffled stirred tank was computed by large eddy simulation (LED) and the flow field was developed using the Sliding Mesh (SM) approach. In this CFD study, mixing times and power number have been determined for a vessel agitated by a 6-blade Rushton turbine. The predicted results were compared with the published experimental data. The satisfactory results ...

Pressure effects on regioselectivity and yield of cycloaddition reactions have been shown to exist. Nevertheless, high pressure synthetic applications with subsequent benefits in the production of natural products are limited by the general availability of the equipment. In addition, the virtues and limitations of microflow equipment under standard conditions are well established. Herein, we ap...