A 40 wt% Pt/C cathode electrocatalyst with controlled Pt particle size of approximately 2.9 nm showing better performance than commercial catalyst for direct methanol fuel cell was prepared by a polyol process with water but without using stabilizing agent.

The H(2)-NO(3)(-) electrochemical cell using nitrate reduction on a non-precious cathode catalyst shows much improved efficiency despite ∼75% reduction of Pt metal loading as compared to typical PEMFCs using typical ORR on precious catalysts.

Iron aminoantipyrine (Fe-AAPyr), graphene nanosheets (GNSs) derived catalysts and their physical mixture Fe-AAPyr-GNS were synthesized and investigated as cathode catalysts for oxygen reduction reaction (ORR) with the activated carbon (AC) as a baseline. Fe-AAPyr catalyst was prepared by Sacrificial Support Method (SSM) with silica as a template and aminoantipyrine (AAPyr) as the organic precur...

in this paper, a non-isothermal two-phase flow in the cathode gas diffusion layer (gdl) of pem fuel cell is modeled. the governing equations including energy, mass and momentum conservation equations are solved by numerical methods. also, the optimal values of the effective parameters such as the electrodes porosity, gas diffusion layer (gdl) thickness and inlet relative humidity are calculated...

La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF) powders with different particle sizes, synthesized through a citrate complexation method and a gel-casting technique, are used to fabricate porous LSCF cathodes with graded microstructures via tape casting. To create porous electrodes with desired porosity and pore structures, graphite and starch are used as pore former for different layers of the graded cathode....

Microbial electrolysis cell (MEC) is a gripping bio-electrochemical device producing H2 gas from renewable biomass while at the same time treat wastewater.  Through extensive global research efforts in the latest decade, the performance of MECs, including energy efficiency, hydrogen production rate (HPR), and hydrogen recovery have achieved significant breakthroughs. However, employi...

In this work we investigate the effect of platinum loading and layer thickness on cathode catalyst degradation by a comprehensive in situ STEM-EDS characterization. To decouple from each other, experiments were categorized two sets, with loadings varying between 0.1 0.4 mg Pt cm −2 : (i) Samples constant Pt/C ratio thus thickness, (ii) samples ratios, achieved dilution bare carbon, to maintain ...