Synchrotron real-time radioscopy and in situ microtomography are the only techniques providing direct visible information on a micrometre scale of local deformation in the implant-abutment connection (IAC) during and after cyclic loading. The microgap formation at the IAC has been subject to a number of studies as it has been proposed to be associated with long-term implant success. The next st...

We demonstrate cyclic strain hardening and frequency-dependent fatigue life in electrodeposited nanocrystalline Ni subjected to tension–tension cyclic deformation. These observations are rationalized through mechanistic arguments based on the exhaustion of dislocation sources in the early stages of cyclic loading and on the domination of diffusive processes during later stages. 2005 Acta Materi...

The aim of this study is to evaluate the microstructures, tensile lap shear strength, and fatigue resistance of 6022-T43 aluminum alloy joints welded via a solid-state welding technique-ultrasonic spot welding (USW)-at different energy levels. An ultra-fine necklace-like equiaxed grain structure is observed along the weld line due to the occurrence of dynamic crystallization, with smaller grain...

Percutaneous heart valve replacement is currently limited to the replacement of pulmonary and aortic valves in a targeted group of patients. Designing a heart valve for mitral valve replacement is further limited by its distinctive anatomical feature, which places a constraint on its range of design options. To overcome such limitations, the objectives of this study were to use computational mo...

This study aims to validate, using finite element analysis (FEA), the design concept by comparing the fatigue behavior of hip implant stems coated with composite (carbon/PEEK) and polymeric (PEEK) coating materials corresponding to different human activities: standing up, normal walking and climbing stairs under dynamic loadings to find out which of all these models have a better performance in...

Most overuse tendinopathies are thought to be associated with repeated microstrain below the failure threshold, analogous to the fatigue failure that affects materials placed under repetitive loading. Investigating the progression of fatigue damage within tendons is therefore of critical importance. There are obvious challenges associated with the sourcing of human tendon samples for in vitro a...

The ferritic ductile iron (FCD400) is widely used as industrial material. As regards to its high temperature application, fatigue at elevated temperature, and advanced mechanical properties has been investigated and clarified. In low cycle fatigue (LCF), the S-N curve is presented by the relation of plastic strain to the number of cycles as fatigue life, which can be predicted by the Manson-Cof...

A cyclic plastic zone area near fatigue-fractured surface was studied using a back-reflection camera and high intensity, microbeam, synchrotron X-ray source (SR) in order to measure the variation of the stress intensity factor range (AK) along the fatigue fracture. The existence of subgrains within the cyclic plastic region was shown by the appearance of small spots in the Debye-Scgerrer rings ...

This study investigated the influence of surface roughness and cyclic loading on fatigue resistance in Y-TZP subjected to hot isostatic pressing (HIP). Fifty Y-TZP cylinders 3.0 mm in diameter were divided into Group A (polished by centerless method; TZP-CP) or Group B (blasted and acid-etched: TZP-SB150E). Twenty five cp-titanium cylinders (Ti-SB150E) were used as a control. Static and cyclic ...

The fatigue behavior of a Ceramic Matrix Composite (CMC) at intermediate temperature under air is investigated. Because of the low density and the high tensile strength of CMC, they offer a good technical solution to design aeronautical structural components. The aim of the present study is to compare the behavior of this composite under static and cyclic loading. Comparison between incremental...