In this study, electroless Ni-B depositions were achieved on the St-37 steel substrates at different NaBH4 concentrations and 950 oC 1 hour. Electroless deposited samples had a cauliflower-like surface texture that makes lubricating naturally as concentration increased, grain size decreases in microstructure. XRD spectra of sample showed partial amorph region together with crystalline region. M...

Microwave (MW) plasma was applied to the surface of polyimide (PI) films as a treatment to enhance the adhesion between copper deposition layer and PI surface for electroless plating. The influences of nitrogen MW plasma treatment on chemical composition of the PI surface were investigated by using X-Ray photoelectron spectroscopy (XPS). The wettability was also investigated by water contact an...

Magnesium-based bulk metallic glass matrix composites (BMGMCs) have better plasticity than the corresponding bulk metallic glasses (BMGs); however, their strength and density are often compromised due to the fact that the effective reinforcement phase is mostly plastic heavy metal. For lightweight SiC-particle reinforced BMGMCs, interface wettability and the sharpness of the particles often red...

This work describes newly structured stacked silicon nanowires (s-SiNWs), consisting of nanosized silicon wires on top of silicon microrods (SiMRs) and exhibiting pronouncedly superior electron field emission (EFE) characteristics to the conventional SiNWs, by using a two-step electroless metal deposition process. Experimental results indicate that for these s-SiNWs, the electrostatic "screen e...

In this paper, we describe the first example of a sustained galvanic coating deposited on a surface from a non-aqueous liquid. We present the surface characterization of electroless silver deposits on copper substrates from a solution of Ag(+) ions in an ionic liquid based on a choline chloride (ChCl) eutectic. Through a study of these deposits and the mechanism of formation using acoustic impe...

The present study outlines the use of Taguchi parameter design to minimize the wear performance of electroless Ni-B coating by optimizing the tribological testing parameters. The tests are carried out in a multitribotester and the three parameters viz. load (L), speed (S) and time (T) are considered with three levels each. An L27 array is used to accommodate the three factors as well as their i...

Sodium-ion batteries (SIBs) are emerging as potential stationary energy storage devices due to the abundance and low cost of sodium. A simple and energy efficient strategy to develop electrodes for SIBs with a high charge/discharge rate is highly desirable. Here we demonstrate that by surface modification of Ge, using electroless deposition in SbCl3/ionic liquids, the stability and performance ...

In this research, tribological characteristics of Ni-P electroless coating and double-layered Ni-P/Ni-B electroless coating were studied. For this purpose, Ni-P electroless coating with 25 μm thickness was initially applied to the surface of steel Ck45 samples; then, a double-layered Ni-P/Ni-B electroless coating, including inner layer of Ni-P with 15 μm thickness and outer layer of Ni-B with 1...

Electroless cobalt films have been obtained by deposition using a plating bath containing two reducing agents: dimethylamineborane (DMAB) and sodium hypophosphite. This formulation allows spontaneous activation on copper followed by auto catalytic electroless plating. CoWBP and CoBP films are proposed as diffusion barriers and encapsulation layers, for copper lines and via contacts for ULSI int...