Electroless nickel plating is a widely used plating method in many industries. The usability of the coating is, however, restricted by the control problems related to the electroless nickel plating process. To ensure deposit quality, the transcendent properties of electroless nickel deposit should be accurately controlled during plating, which is challenging because of the spontaneous, unstable...

An ultrasound-assisted activation method for electroless silver plating is presented in this study. When the ultrasound was applied during the activation step, the amount of the Pd species adsorbed on substrate surfaces was higher than that of sample pretreated with a conventional activation process without ultrasound irradiation. With this activation method, it was also shown that the adsorbed...

The paper discusses optimising work on a method of processing ceramic / metal composite coatings for various applications and is based on preliminary work on processing anodes for solid oxide fuel cells (SOFCs). The composite coating is manufactured by the electroless co-deposition of nickel and yttria stabilised zirconia (YSZ) simultaneously on to a ceramic substrate. The effect on coating cha...

Electroless nickel is often plated on the surface of aluminum mirrors to improve the ability to polish the mirror surface. Electroless nickel plating can cause a bimetallic effect, creating distortion of a mirror surface if it is heated or cooled. Published data listing the thermal coefficient of expansion and Young’s modulus as a function of temperature for electroless nickel is not readily av...

The influence of pretreatment of AAO template and deposition process on magnetic NiCoFe nanowire fabricated by electroless method was investigated. The Electroless process carried out at room temperature using DMAB as a reductant agent. SEM and EDX analysis used to characterize the deposited sample. According to the results, sonication during deposition process is not recommended in fabrication...

The use of magnesium alloys is limited due to their susceptibility to corrosion although they have many attractive physical and mechanical properties. To increase mechanical and corrosion properties of these alloys, many deposition method and coating types are used. Electroless Ni–B coatings have received considerable interest recently due to its unique properties such as cost-effectiveness, th...

We have employed electroless deposition to prepare smooth films (mirrors) of silver that could be used as substrates in microcontact printing (μCP) of alkanethiols. Good-quality SAMs of hexadecanethiolate were formed on thin films of electroless silver by printing with an elastomeric stamp; these SAMs were effective resists in protecting the underlying silver from etching in an aqueous ferricya...

silicon nanowire (sinw) arrays were produced by electroless method on polycrystalline si substrate, in hf/ agno3 solution. although the monocrystalline silicon wafer is commonly utilized as a perfect substrate, polycrystalline silicon as a low cost substrate was used in this work for photovoltaic applications. in order to study the influence of etching time (which affects the sinws length) on d...

As a surface finish, electroless nickel / electroless palladium / immersion gold (ENEPIG) has received increased attention for both packaging/IC-substrate and PWB applications. With a lower gold thickness compared to conventional electroless nickel / immersion gold (ENIG) the ENEPIG finish offers the potential for higher reliability, better performance and reduced cost.[1,2] This paper shows th...

We present an original two-step method for the deposition via precipitation of Pd nanoparticles into macroporous silicon. The method consists in immersing a macroporous silicon sample in a PdCl2/DMSO solution and then in annealing the sample at a high temperature. The impact of composition and concentration of the solution and annealing time on the nanoparticle characteristics is investigated. ...