In this paper, the correlation between the local strain distributions and the average strains obtained by an x-ray measurement are studied through numerical modeling. The finite element method (FEM) is used to simulate the local strain distributions within a three-dimensional random aggregate of isotropic and orthotropic single crystals with hexagonal symmetry under uniaxial elastic tension. Ca...

The effects of incorporating local mechanical behaviour into a structural analysis of a cast ductile iron component are investigated. A recently presented simulation strategy, the closed chain of simulations for cast components, is applied to incorporate local behaviour predicted by a casting process simulation into a Finite Element Method (FEM) structural analysis, and the effects of the strat...

In this paper, the effect of interference fit on fatigue life of holed plate of mechanical joints was investigated experimentally. Fatigue tests were carried out on the holed specimens of Al-alloy 7075-T6 alloy. The interference fit process consists of force fitting a fastener into the hole with a negative clearance (diameter of the fastener is larger than of the hole) that produces beneficial ...

the pseudo-elastic behavior of shape memory alloy (sma) truss and cantilever beam are investigated. brinson’s one-dimensional material model, which uses the twinned and detwinned martensite fractions separately as internal variables, is applied in the algorithm to establish the sma stress-strain characteristics. this material model also incorporates different young’s modulus for austenitic and ...

In this paper, transverse and longitudinal vibration of nonlinear plate under exciting of orbiting mass is considered based on first-order shear deformation theory. The nonlinear governing equation of motion are discretized by the finite element method in combination with Newmark’s time integration scheme under von Karman strain-displacement assumptions. For validation of method and formulation...

In the present investigation, two dimensional elastoplastic finite element analysis was conducted to assess the deformation characteristics of Al 1100 alloy during continuous confined strip shearing (C2S2) process. The results of simulations showed that the plastic strain distribution across the deformed sample is non-uniform irrespective of the amount of friction and C2S2 die angle. The most u...

in this article, finite element method and ale formulation were used to numerically simulate impact of low-velocity specific projectiles with water surface. for the simulation, ls-dyna finite element code was used. material models which were used to express behavior of air and water included null material model. for the projectile, plastic-kinematics material model was applied. mie-gruneisen eq...