In this paper, the production of Al2O3-Mo nano-composites via mechanical milling was investigated. Molybdenum and alumina powders with certain ratios were grounded in a planetary ball mill at different times. XRD technique was used to determine the crystallite size of the milled powders. The microstructure of milled powders was studied using optical and electron microscopes. The crystallite siz...

The microstructural evolution, thermodynamics, and kinetics of Mo (21 wt %) Tm₂O₃ powder mixtures during ball milling were investigated using X-ray diffraction and transmission electron microscopy. Ball milling induced Tm₂O₃ to be decomposed and then dissolved into Mo crystal. After 96 h of ball milling, Tm₂O₃ was dissolved completely and the supersaturated nanocrystalline solid solution of Mo ...

In the present work, the behavior of Cu-Cr powder mixtures during mechanical alloying has been studied. The powder mixtures with 1, 3 and 6 weight percents of Cr in Cu were treated. They were milled in a ball mill with two different speeds of 250 and 500 rpm using equal numbers of 1 and 2 centimeters balls. The weight ratio of balls to powders was 10 to 1 under argon atmosphere. Ethanol was use...

Nanostructured Cu-20Fe alloy was synthesized by mechanical alloying process and the effects of process control agents (PCA) on the phase formation, crystallite refinement and morphology of powder particles were studied. The dissolution of Fe into Cu matrix and the morphology of powder particles were analyzed by X-ray diffraction (XRD) technique and scanning electron microscopy (SEM), respective...

A new metal mold material for pulsed current sintering (PCS) methods at high temperatures with higher electrical resistivity than cemented carbide molds, was fabricated using mechanical milling and PCS. The constituent (100 1 x)(WC­10 or 30FeAl) + xC (x = 0­8; mass%) hard material with dispersed spherical carbon particles were synthesized via mechanical milling of the source powders and PCS. Th...

Wood-based materials are used extensively in residual construction worldwide. Most of the adhesives used in wood-based materials are derived from fossil resources, and some are not environmentally friendly. This study explores nanofiber technology as an alternative to such adhesives. Previous studies have shown that the three-dimensional binding effects of cellulose nanofiber (CNF), when mixed ...

Hydroxyapatite/alpha-alumina composites were prepared by means of high-energy vibratory ball milling. The effect of the addition of alumina, from 5 to 25 wt%, was investigated. x-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) results indicated thathydroxyapatite andaluminawere themajorphases aftermechanicalmilling and only small peak shifts were observed. Transmission...

The microstructures and mechanical properties of cobalt-chromium (Co-Cr) alloys produced by three CAD/CAM-based processing techniques were investigated in comparison with those produced by the traditional casting technique. Four groups of disc- (microstructures) or dumbbell- (mechanical properties) specimens made of Co-Cr alloys were prepared using casting (CS), milling (ML), selective laser me...