For a reciprocating compressor of household refrigerators, a direct analogy between the pipe flow network and the electric circuit network has been utilized to set up a mathematical model for oil supply system. Individual lubrication elements of the oil supply system, such as propeller-installed oil cap, oil galleries, radial oil feeding holes, spiral oil grooves, and various sliding surfaces h...

In this contribution, linearized dynamic model of Cumulative Mass Fraction (CMF) of Potassium Nitrate-Water Seeded Continues Mixed Suspension Mixed Product Removal (CMSMPR) crystallizer is approximated by a simplified model in frequency domain. Frequency domain model simplification is performed heuristically using the frequency response of the derived linearized models data. However, the CM...

The objective of this paper is the numerical study of the flow through an axial fan and examining the effects of blade design parameters on the performance of the fan. The axial fan is extensively used for cooling of the electronic devices and servers. Simulation of the three-dimensional incompressible turbulent flow was conducted by numerical solution of the (RANS) equations for a model. The S...

Internal pipeline corrosion in oil production and transportation is always associated with the presence of water, and the likelihood of corrosion generally increases with the volume fraction of water. When the walls of the pipeline are wetted with oil no corrosion is possible. Highly turbulent flow was associated with negligible corrosion due to water entrainment by the flowing oil, whereas low...

Investigating nozzle’s orifice flow is challenging both experimentally and theoretically. This paper focuses on simulating flow inside diesel injector nozzle via Ansys fluent v15. Validation is performed with experimental results from Winkhofler et al (2001). Several important parameters such as mass flow rate, velocity profiles and pressure profiles are used for this validation. Results includ...

Leakage of underwater crude oil pipes causes severe pollution to soil and water, and results in great economic loss. To predict the diffusion area of spilled oil before it reaches the water's surface and to reduce the time required for emergency response, numerical simulations were conducted on underwater spilled oil diffusion of bare crude oil pipes using FLUENT software. The influences of wat...

joule-thomson cooling systems are used in refrigeration processes such as cryogenic gas liquefaction. although extensive studies have been carried out by researchers, most of them include cryogenic heat exchangers and their associated fields. in the current study, an attempt was made to indicate the effect of using inappropriate operational conditions in a cryogenic joule-thomson cooling system...

This report details work done by the author during a six month secondment from Schlumberger Cambridge Research to Intevep during April to October 1997. A mathematical description for the flow within a porous permeable medium of oil containing dissolved gas, and capable of liberating that gas when the pressure is dropped to form small bubbles or regions of connected gas, is presented. The intent...

The response of an adjustable critical-flow Venturi nozzle is investigated through a set indoor experiments aimed to determine the related critical flow rate, pressure ratio, and discharge coefficient. effect variation in cone displacement liquid content on characteristics examined detail it shown that former can be used effectively adjust rate. ratio considered above 0.85, control deviation ga...