نتایج جستجو برای: reaction sintering
تعداد نتایج: 422963 فیلتر نتایج به سال:
In this work, self-lubricating composites containing MoS2 and graphite dispersed in an iron matrix were produced by powder metallurgy sintering. Previous studies demonstrate that reacts with matrixes during sintering, making the production of Fe-MoS2 rather difficult. Therefore, study focused on a potential solution to avoid or reduce reaction, whilst still providing good tribological propertie...
The potassium sodium niobate, K0.5Na0.5NbO₃, solid solution (KNN) is considered as one of the most promising, environment-friendly, lead-free candidates to replace highly efficient, lead-based piezoelectrics. Since the first reports of KNN, it has been recognized that obtaining phase-pure materials with a high density and a uniform, fine-grained microstructure is a major challenge. For this rea...
Microwave sintering is a new sintering technology developed in the middle to late period of the 1980’s, which is characterized by fast densification for ceramic materials[1]. In recent years, microwave heating has been well employed in the field of sintering and joining of ceramics as a result of its advantages against conventional methods. These ceramic materials include oxides, mixed oxides, ...
The effects of TiO2 addition on properties of alumina spinel refractory castables werer investigated in this research. For this purpose three different composition with 0, 6 and 9 perecent TiO2, (SP), (SP-6T) and (SP-9T), were preparedin order to test and measure the properties of the castables. Then the samples were sintered from 1000-1600ºC in an electric furnace. The characterization resul...
Thermal effects are important considerations at the initial stage in spark plasma sintering of non-conductive Al2O3 powders. The generalized thermo-elastic theory is introduced to describe the influence of the heat transport and thermal focusing caused by thermal wave propagation within a constrained space and transient time. Simulations show that low sintering temperature can realize high loca...
By the conventional solid state reaction method, a small amount of lithium fluoride (LiF) was used as the sintering promoter to improve the sintering and piezoelectric characteristics of (Ba0.95Ca0.05)(Ti0.93Sn0.07)O₃ (BCTS) lead-free piezoceramic sheets. Using X-ray diffraction (XRD) and a scanning electron microscope (SEM), the inferences of the crystalline and surface microstructures were ob...
Large-scale Cu2S tetradecahedrons microcrystals and sheet-like Cu2S nanocrystals were synthesized by employing a hydrothermal synthesis (HS) method and wet chemistry method (WCM), respectively. The morphology of α-Cu2S powders prepared by the HS method is a tetradecahedron with the size of 1–7 μm. The morphology of β-Cu2S is a hexagonal sheet-like structure with a thickness of 5–20 nm. The resu...
Porous structures formed by sintering of powders, which involves material-bonding under the application of heat, are commonly employed as capillary wicks in two-phase heat transport devices such as heat pipes. These sintered wicks are often fabricated in an ad hoc manner, and their microstructure is not optimized for fluid and thermal performance. Understanding the role of sintering kinetics—an...
In this contribution we discuss the sintering of an inkjet-printed copper nanoparticle ink based on electrical performance and microstructure analysis. Laser and intense pulsed light (IPL) sintering are employed in order to compare the different techniques and their feasibility for electronics manufacturing. A conductivity of more than 20% of that of bulk copper material has been obtained with ...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید