Cracking of the concrete cover due to corrosion is defined as the serviceability limit state of reinforced concrete structures. This study evaluated the influence of a mineral admixture i.e. nano wollastonite on corrosion performance and serviceability of reinforced concrete structures by performing an accelerated corrosion test on ten reinforced concrete beams under a sustained load. To do so,...

A technical benchmarking study is presented, aimed to evaluate the EU harmonized Romanian seismic assessment code in comparison with its European and U.S. homologues and to identify potential opportunities for its future improvement. The benchmarking procedures are illustrated by parallel seismic assessments, performed, according to the analyzed regulations, on a reinforced concrete frame struc...

In this paper, modeling of high speed projectiles with different nose shapes, penetrating into steel fiber reinforced concrete is investigated. This is a novel study because it considers the length to diameter ratio of steel fiber as well as projectile length to diameter ratio and volume fraction of fiber used in concrete matrix on the impact resistance of steel fiber reinforced concrete fibers...

this study evaluates two different types of techniques for concrete hollow-block sections reinforced with traditional steel rebars and wire meshes, and compares their structural behaviour to that of an ordinary reinforced concrete beam section. the comparisons are based on the responses both before and after they were repaired with glass fibre reinforced polymers (gfrp). the specimens were subj...

Abstract: Masonry infill is considered as a non-structural element in all type of buildings where masonry use. But, masonry infill walls are mainly used to increase initial stiffness and strength of reinforced concrete (RC) frame buildings. This Open First storey is also termed as “Soft Storey”. The upper storeys have brick infilled wall panels with various opening percentage in it. In many cit...

Within the scope of literature, influence openings within infill walls that are bounded by a reinforced concrete frame and excited seismic drift forces in both in- out-of-plane direction is still uncharted. Therefore, 3D micromodel was developed calibrated thereafter, to gain more insight topic. The micromodels were against their equivalent physical test specimens in-plane, driven tests on fram...

Polypropylene Fiber Reinforced Concrete is an embryonic construction material which can be described as a concrete having high mechanical strength, Stiffness and durability. By utilization of Polypropylene fibers in concrete not only optimum utilization of materials is achieved but also the cost reduction is achieved. This paper presents a comprehensive review on various aspects Polypropylene F...

Corrosion of steel reinforcement is one of the most prevalent causes of reinforced concrete (RC) structures deterioration in chloride-contaminated environments. As a result, evaluating the impact of any possible corrosion-induced damages to reinforced concrete bridges strongly affects management decisions: such as inspection, maintenance and repair actions. The corrosion propagation phase is a ...