Present work is an effort to reveal the junction properties of gold (Au) / Zinc oxide (ZnO) nanorods based Schottky diode by using the frequency dependent electrical properties. The most important electrical parameters such as conductance (G), resistance (R), capacitance (C) and impedance (Z) were studied as function of frequency across the series of AC voltages. Moreover, current density-volta...

On a single ZnO nanowire (NW), we fabricated an inverter-type device comprising a Schottky diode (SD) and field-effect transistor (FET), aiming at 1-dimensional (1D) electronic circuits with low power consumption. The SD and adjacent FET worked respectively as the load and driver, so that voltage signals could be easily extracted as the output. In addition, NW FET with a transparent conducting ...

Tantalum silicide (TaSix ) films with different Si to Ta ratios (x) as Schottky contacts to GaAs have been studied. The films were prepared by coevaporation. The metallurgical properties of the film and the stability of the silicide-GaAs interface were studied by x-ray diffraction, Auger electron spectroscopy, and Rutherford backscattering spectroscopy. The films were annealed at various temper...

Aalto University, P.O. Box 11000, FI-00076 Aalto www.aalto.fi Author Tero Kiuru Name of the doctoral dissertation Characterization, modeling, and design for applications of waveguide impedance tuners and Schottky diodes at millimeter wavelengths Publisher School of Electrical Engineering Unit Department of Radio Science and Engineering Series Aalto University publication series DOCTORAL DISSERT...

Detection of nuclear radiation such as alpha particles has become an important field of research in recent history due to nuclear threats and accidents. In this context; deoxyribonucleic acid (DNA) acting as an organic semiconducting material could be utilized in a metal/semiconductor Schottky junction for detecting alpha particles. In this work we demonstrate for the first time the effect of a...

Carrier multiplication (i.e. generation of multiple electron-hole pairs from a single high-energy electron, CM) in graphene has been extensively studied both theoretically and experimentally, but direct application of hot carrier multiplication in graphene has not been reported. Here, taking advantage of efficient CM in graphene, we fabricated graphene/TiO2 Schottky nanodiodes and found CM-driv...

This paper reports the design, fabrication and characterization of high voltage 4H-SiC merged PiN/Schottky-barrier (MPS) diodes with an active area of 1.4mm. For comparison purposes, Schottky barrier, PiN and MPS diodes of smaller size (8.1x10mm) have also been designed and fabricated on the same wafer with a 30μm, n=2x10cm doped drift layer. The Schottky spacing between the adjacent p+ regions...

Schottky diode with 6H-SiC/MEH-PPV/Al polymer interface was prepared and characterized by using current-voltage data in the temperature range of 80-400K. Important parameters produced such as ideality factor, barrier height saturation current were calculated. In addition, series resistance calculated Cheung Norde methods. characteristics discussed comparing each other literature. Strong depende...

We have fabricated graphene-silicon Schottky diodes by depositing mechanically exfoliated graphene on top of silicon substrates. The resulting current-voltage characteristics exhibit rectifying diode behavior with a barrier energy of 0.41 eV on n-type silicon and 0.45 eV on p-type silicon at the room temperature. The I-V characteristics measured at 100, 300, and 400 K indicate that temperature ...

By assembling a ZnO nanowire (NW) array based nanogenerator (NG) that is transparent to UV light, we have investigated the performance of the NG by tuning its carrier density and the characteristics of the Schottky barrier at the interface between the metal electrode and the NW. The formation of a Schottky diode at the interface is a must for the effective operation of the NG. UV light not only...