When a steel moment-resisting frame deforms horizontally, H-shaped beams are subjected to the flexural moment gradient. Generally, rigidly connected box section columns possessing large fork restraint. Further, continuous braces on top flange effectively prevent lateral buckling. In this paper, buckling behavior of continuously braced with restraint under gradient is clarified theoretically and...

Steel extended end plate bolted connections are recommended to be widely utilized in special moment-resisting frame subjected to monotonic loading. Improper design of steel beam to column connection can lead to the collapse and fatality of structures. Therefore comprehensive research studies of beam to column connection design should be carried out. Also the performance and effect of corrugated...

In this paper, efforts are made to compare the safety of steel moment resistant frames designed according to different editions of the Iranian code of Practice for seismic resistant design of buildings. Also, failure risk of a low and medium height frame which designed for high and low seismicity regions according to three editions of the code are evaluated. First, the testing cases were design...

Following the Northridge earthquake of 1994, a significant number of steel moment resisting structural systems were damaged. Several studies have been conducted to improve the seismic performance of steel structures and specially their beam-to-column connections. One of the proposed connections for special moment-resisting frames included AISC-358 is Kaiser bolted bracket moment connection, bri...

this paper provides a comparison of the maximum inter-story drifts and tip acceleration of both a 16 and 30 stories building each with different structural systems; hybrid r.c moment frame with shear walls and hybrid steel frame with shear walls and x bracing which are equipped by passive dampers. each of the building models were analyzed as fully non-linear structures for variety of dampers pl...

In nonlinear dynamic analyses of RC structures based on fiber-based discretization of member cross-sections, the constitutive model used to represent the cyclic behavior of reinforcing steel typically plays a significant role in controlling the structural response especially for nonductile systems. The accuracy of a fiber-section model is almost entirely dependent on the ability of both the con...

The steel frame reinforced with steel shear wall is a lateral load resisting system and has higher strength and shear performance than the concrete shear wall system. Especially, using corrugated steel plates in these shear wall systems improves out-of-plane stiffness and flexibility in the deformation along the corrugation. In this paper, a cyclic loading test of this steel frame reinforced wi...

The present study addresses optimal design of reinforced concrete (RC) columns based on equivalent equations considering deformability regulations of ACI318-14 under axial force and uniaxial bending moment. This study contrary to common approaches working with trial and error approach in design, at first presents an exact solution for intensity of longitudinal reinforcement in column section by...