Experimental investigations has been done to find out the heat transfer characteristics and friction factor of water based Al2O3 nanofluids as a coolant in  brazed plate heat exchanger. Plate heat exchanger either use horizontally or vertically. The base plate of the plate heat exchanger was kept inclined at (0⁰, 30⁰ ,60⁰, 90⁰). The experimentation have been done on the two different concentrat...

the objective of the present study is the synthesis of mwcnt-tio2 hybrid nanostructures by solvothermal synthesis method with ticl4 as precursor. the heat transfer enhancement due to the use of mwcnt-tio2 nanofluid was investigated. as-prepared hybrid materials were characterized by x-ray diffraction (xrd) and scanning electron microscopy (sem). the results showed that mwcnts were uniformly dec...

Thermal stresses due to long running of spark ignition engine often results in wear and tear cylinder near the top dead center (TDC). These high thermal at TDC arise temperature gradient during ignition. This situation eventually decreases life efficiency an engine. In this study, numerical analytical analysis was carried out on 1298 cc line four stroke (SI) having a power output 63 kW drop pea...

In the present study, an experimental study is carried out to investigate the effect of adding Al and Cu nanoparticles to the base fluid (water) on the heat transfer rate in a spirally coiled tube. The spirally coiled tube is fabricated from the straight copper tube with the inner and outer coil diameters of 100 and 420 mm, respectively. The experiments have been done for water and two types of...

The in-flight ice formation and accretion are highly dependent on weather conditions that essentially affect the heat transfer capability. When the temperature is sufficiently cold, the heat transfer is adequate to remove all of the latent heat from the collected water. The rate of rime ice accretion is controlled by the droplet collection efficiency. Otherwise, when the heat transfer is inadeq...

In the current research project, the thermal performance of a series of newly designed mixers has been investigated. Each mixer has two concentric cylinders comprising two annular slot flow channels around a solid cylindrical rod at the center. In each mixer, the first cylinder around the central solid rod has either spherical or pyramidal protrusions throughout the outer surface. It has been o...

In this paper, Turbulent mixed convective heat transfer of water and Al2O3 nanofluid has been numerically studied in a horizontal tube under non-uniform heat flux on the upper wall and insulation in the lower wall using mixture model. For the discretization of governing equations, the second-order upstream difference scheme and finite volume method were used. The coupling of pressure and veloci...

An experimental investigation was carried out to study mixed convection heat transfer from Al2O3-water nanofluid inside a vertical, W-shaped, copper-tube with uniform wall temperature. The tests covered different ranges of some involved parameters including Reynolds number, temperature and particles volume fraction. The results showed that the rate of heat transfer coefficient improved with Rey...

Development of a numerical model which describes launching of offshore jackets from barge is presented in this paper. In this model, in addition to capabilities of commercial softwares, water entry forces on jacket members and an implicit Newmark solution technique are included. The results are in general agreement with other numerical software’s available (SACS). Fluid forces acting on jacket ...

Configurations of a solid pion production target for the neutrino factory that includes a water jacket are simulated in the hadron production code MARS15 [1]. The addition of water coolant and extension of the target into slices may introduce the effects of: yield degredation from pion reabsorption, additional heat load on the target, and increased scatter in arrival times. These three effects ...