The mechanical properties of the Akers type clasp, bar and frame made by the newly developed Ti-20Cr-0.2Si alloy were studied in order to obtain the indices for designing the cast partial denture base. In the case of the clasp, the bending strength of the Ti-20Cr-0.2Si alloy and pure Ti was lower than that of the Co-Cr alloy. The Ti-20Cr-0.2Si alloy and pure Ti may have the same retentive force...

Experimental cast titanium alloys containing 20 mass% chromium (Ti-20Cr) show preferable mechanical properties and a good corrosion resistance. This study evaluated the fretting corrosion behavior of Ti-20Cr. Ti-20Cr (n = 4) and commercially pure titanium (CP-Ti, n = 6) disk specimens were used. The fretting corrosion test was performed by electrochemical corrosion at 0.3 V in 0.9% saline solut...

Two major areas of effort are encompassed: I. New Techniques for the Synthesis of Metals and Alloys The High Rate Physical Vapor Deposition (HRPVD) process is to be used for the following: 1. Preparation and characterization of Ni and Ni-20Cr alloy sheet 2. Synthesis of compounds Y-O., TiC, Si^N, by reactive evaporation and their characterization 3. Dispersion strengthened alloys, Ni-ZOCr-Y-O ,...

4 We examine the efficacy of a novel ensemble data assimilation (DA) technique in climate field 5 reconstructions (CFR) of surface temperature. We perform four pseudoproxy experiments 6 with both general circulation model (GCM) and 20th Century Reanalysis (20CR) data by 7 reconstructing surface temperature fields from a sparse network of noisy pseudoproxies. We 8 compare the DA approach to a co...

The objective of this study was to evaluate change in color in experimental titanium-20mass% chromium (Ti-20Cr) alloy in an oral environment. Pure Ti and Ti-6Al-7Nb and Co-29Cr-5Mo alloys, as references to compare change in color, were prepared by casting. The cast specimen was mirror-polished. Each specimen was affixed to a palatal plate and the plate then worn by a volunteer for up to 300 h. ...

3 We examine the efficacy of a novel ensemble data assimilation (DA) technique in climate field 4 reconstructions (CFR) of surface temperature. We perform several pseudoproxy experiments 5 with both general circulation model (GCM) and 20th Century Reanalysis (20CR) data by 6 reconstructing surface temperature fields from a sparse network of noisy pseudoproxies. We 7 compare the DA approach to a...

fluoride-containing solutien. Commercially pure titanium (CP-Ti) and six titanium-based alloys were used: Ti-O.15Pd, Ti6Al-4V, Ti-7Nb-6Al, Ti-55Ni, Ti-10Cu, and Ti-20Cr. Two test solutions were prepared fbr immersion of polished titanium and titanium alloys: one consisting of O,2% NaF + O,9% NaCl (pH 3.8 with lactic acid) and the other of O.1 mol/1 H202 + O.9% NaCl (pH 5.5). Following immersion...

In the present work, 5 wt.% and 10 yttria-stabilized zirconia (YSZ) nanoparticles were reinforced in Ni-20Cr powder deposited on boiler tube steel using a high-velocity oxy-fuel spraying process. The effect of YSZ reinforcement microhardness, surface roughness porosity was investigated. hardness highest for nanocomposite coating with found to increase decrease porosity. microstructure elements ...