The modulus of elasticity (E) was determined in simple three- and four-point bending for an 0.0175" (3 X 0.008") stainless steel arch wire. Using variable light loads (10-160 g) to limit the elastic deflection of a wire to less than 5% of its beam length, the force-deflection profiles were determined for three nominal span lengths (L = 0.35", 0.75", and 1.00") in three-point bending and three n...

An efficient method for dominant point detection is proposed in this paper. The region of support for each point on curve is determined using bending value. The points with local maximum smoothing bending value can be located as the dominant points on the curve. The proposed algorithm needs no input parameter. The experimental results show that the new method is efficient and effective in detec...

the main objective of this study is to drive a simple solution for prediction of steel fiber reinforced concrete (sfrc) behavior under four point bending test (fpbt). in this model all the force components at the beam section (before and after cracking) are formulated by applying these assumptions: a bilinear elastic-perfectly plastic stress-strain response for concrete behavior in compression,...

We present an effective-medium theory that includes bending as well as stretching forces, and we use it to calculate the mechanical response of a diluted filamentous triangular lattice. In this lattice, bonds are central-force springs, and there are bending forces between neighboring bonds on the same filament. We investigate the diluted lattice in which each bond is present with a probability ...

The effect of an electric field on the bending behavior of [001] oriented and poled relaxor Pb(In1/2Nb1/2)O3–Pb(Mg1/3Nb2/3)O3–PbTiO3 (PIN–PMN–PT) single crystals was measured using a four point bending apparatus with a longitudinal electric field applied to the bar during bending. The surface finish and electric field amplitude were observed to affect the bending strength. Polished surfaces imp...

An elastic finite element analysis was conducted to evaluate the stress distribution in the initiation zone of the adhesive rupture during the 3-point bending test. This test is used to measure the adherence between a polyepoxy adhesive and aluminum alloy with different surface treatments. The purpose is to compare, in the high stress concentration areas, the stress fields calculated using fini...

where M is the bending moment, F is the force applied, and D is the distance from the point of force application to the axis of rotation (moment arm length). This is perhaps best depicted in Figure 11.1. Using this equation, one can determine the bending moment applied in any given clinical circumstance. The bending moment has substantial clinical significance. The application of a bending mome...