Aluminum/alumina composites are used in automotive and aerospace industries due to their low density and good mechanical strength. In this research, the effect of mechanical stirring of slurry in liquid-solid phase temperature and injection of alumina powder with inert gas (Ar) on microstructure and mechanical properties of Al-A356 alloy is investigated. In order to improve of the wettability a...

Simple nanoporous alumina matrix modification procedure, in which the electrically highly insulating alumina barrier layer at the bottom of the pores is replaced with the conductive layer of the gold beds, was described. This modification makes possible the direct electron exchange between the underlying aluminum support and the redox species encapsulated in the alumina pores, thus, providing t...

using the nanotechnology and decreasing the dimension of reinforcement particles to nanometer, outstanding mechanical properties are achieved in aluminum matrix nanocomposites. fabrication of aluminum matrix nanocomposites by casting is of great importance because of its simplicity, low cost and ease of the control of matrix microstructure. in this study, the aging behavior of nanocomposite sam...

Simple nanoporous alumina matrix modification procedure, in which the electrically highly insulating alumina barrier layer at the bottom of the pores is replaced with the conductive layer of the gold beds, was described. This modification makes possible the direct electron exchange between the underlying aluminum support and the redox species encapsulated in the alumina pores, thus, providing t...

It is known that the toughness of brittle ceramics can be improved significantly with the addition of hard platelets. In the present study, platelet-shape multilayer ceramic laminates are utilized as a toughening agent for alumina ceramics. They are prepared by laminating the BaTiO3-based ceramic tapes. Although the elastic modulus of the BaTiO3based platelets is lower than that of the alumina ...

The silver toughened alumina ceramics, which were fabricated via a conventional ceramic processing route using commercially available alumina and silver oxide powders as the starting materials, exhibit a higher fracture toughness (6 to 9 MPamo.5) than the monolithic alumina ceramic ( 2.5 to 3.0 MPamo.5). The weak interfacial bonding between the silver inclusions and the alumina matrix is charac...

The paper reviews progress for a program of research on alumina ceramics processing, with particular reference to diffraction results achieved using tube x-rays, neutrons and synchrotron radiation. Outcomes from three related studies are examined. l Calcination of alumina hydrates to o-alumina via intermediate aluminas, including some new results indicating the co-existence of cubic and tetrago...