In this paper, analysis, design and implementation of non-isolated soft-switching bidirectional DCDC converter with an active switch are described. The proposed topology gives the output voltage as twice as the input voltage and enhances the efficiency up to 94.5% and 92.9% for boost and buck mode operation by proper selection of the duty cycle. Soft switching can be achieved at both steps up a...

-The simulation of a nonlinear controller with power sharing control capabilities for a wind energy system double input buck boost–buck boost converter is presented. A multiple-input DC–DC converter is useful to obtain the regulated output voltage from input power source such as a wind array. Double input DC-DC buck boost converter principle of operation and the equations describing the convert...

In this paper a single-inductor dual-output (SIDO) buck-boost PFC converter operating in critical conduction mode (CRM) is proposed. By multiplexing a single inductor, each output of SIDO buck-boost converter can be regulated independently. Compared with conventional two-stage multiple output converter, SIDO buck-boost PFC converter benefits from significant overall cost saving, small size and ...

A Power Factor Correction Using singleinductor dual-output buck-boost converter operating in critical conduction mode is proposed in this paper. Each output of the SingleInductor Dual-Output buck-boost converter can be regulated independently by multiplexing a single inductor, Compared with a conventional two-stage multiple-output converter, the singleinductor dual-output buck-boost converter b...

1 This work is supported by Philips Research, Briarcliff Manor, NY, through Colorado Power Electronics Center Abstract – Single-switch step-up/step-down converters, such as the buck-boost, SEPIC and Cuk, have relatively high voltage and current stresses on components compared to the buck or the boost converter. A buck-boost converter with two independently controlled switches can work as a boos...

The DC transfer functions for the buck, boost, and Cuk PWM DC-DC converters in continuous conductionmodearell, l / ( l D ) , and-D/( l -D) respectively, ,where D is the duty cycle. Therefore. it is reasonable to expect that the Cuk PWh4 DC-DC converter circuit [l] can be synthesized by cascading boost and buck converter circuits. The purpose of this paper is to present a systematic and rigorous...

In this paper presents new topologies Multilevel DC-DC buck-boost converter which consists of an inductor based boost circuit and a switched capacitor circuit has high voltage gain and flexible output voltage. Operation of these switching devices causes inherently nonlinear characteristic to the DC-DC Converters include buck-boost converter. It is suitable for a low voltage power source such as...

Single-Stage transformerless AC/DC converter received much attention in the universal line application. Unlike the existing converters a new high step-down transformerless single-stage single-switch AC/DC converter is proposed. The topology integrates a buck-buck-boost converter with low intermediate bus and output voltage. The converter utilizes a buck converter as a PFC cell and buck-boost co...

In this paper, a new transformerless buck-boost converter based on ZETA converter is introduced. The proposed converter has the ZETA converter advantages such as, buck-boost capability and input to output DC insulation. The suggested converter voltage gain is higher than the classic ZETA converter. In the presented converter, only one main switch is utilized. The proposed converter offers low v...

In this paper, a generalized buck-boost Z-H converter based on switched inductors is proposed. This structure consists of a set of series connected switched-inductor cells. The voltage conversion ratio of the proposed structure is adjusted by changing the number of cells and the duty cycle. Like the conventional Z-H converter, the shoot-through switching state and the diode before LC network ar...