In this paper dynamic damping properties of a nominated flexible structural adhesive have been identified using an extended-direct modal based joint identification method. It has been revealed that damping characteristics of adhesive are correlated to both frequency and mode shape. Young’s and shear moduli increase with frequency but damping on the other hand, decrease. The results showed that ...

in the current study the effect of casimir force and squeezed film damping on the pull-in instability and dynamic behavior of electrostatically actuated nano and micro electromechanical systems is investigated separately. linear elastic membrane theory is used to model the static and dynamic behavior of system for strip, annular and disk geometries. squeezed film damping effect is modeled using...

this study contains the identification of modal dynamic properties of a 3-story large-scale steel test frame structure through shaking table measurements. shaking table test is carried out to estimate the modal properties of the test frame such as natural frequencies, damping ratios and mode shapes. among many different model structures, arx (auto recursive exogenous) model structure is used fo...

Attempts have been made for the first time to produce a friction material with thermal sensitive modulus by the inclusion of combined plastic/rubber properties of thermoplastic elastomers (TPE) as viscoelastic polymeric materials into the formulation for the purpose of increasing the damping behavior. In order to evaluate the viscoelastic parameters such as loss factor (tan δ) and elastic m...

Response of soil depends on both the mechanical properties of soil itself and the nature of loading. Many geotechnical engineering problems are associated with dynamic and cyclic loadings, such as ocean wave or ice loading applied on foundations of offshore structures or bridges, dynamic loading applied on foundations of offshore wind power structures, ocean wave loading on harbor structures, s...

attempts have been made for the first time to produce a friction material with thermal sensitive modulus by the inclusion of combined plastic/rubber properties of thermoplastic elastomers (tpe) as viscoelastic polymeric materials into the formulation for the purpose of increasing the damping behavior. in order to evaluate the viscoelastic parameters such as loss factor (tan δ) and elastic modul...

The purpose of this study was to evaluate the dynamic viscoelastic properties of experimental silicone soft lining materials, Silastic MDX 4-4210 reinforced with silica fillers. Storage modulus (E'), loss modulus (E") and damping factor (tan delta) were determined using a dynamic mechanical analyzer under a deformation strain level of 0.27% at test frequency and a temperature range of 1 Hz and ...

To facilitate the damping matching of dampers for vehicle passive suspensions, this paper proposes an analytical matching method of the optimal piecewise linear damping characteristics curve. Based on the vehicle vibration model, taking the suspension dynamic deflection as the constraint, by the vibration acceleration and the wheel dynamic load, an objective function about the relative damping ...