Electro Discharge Machining (EDM) is a very efficient machining process widely used in manufacturing components of complicated geometry. Based on its nature, i.e. material removal by electric discharge, the process induces thermal stresses that in turn result in generation of wide spread micro-cracks on the surface of the machined part. In this paper the influence of EDM characteristic paramete...

Electrical discharge machining (EDM) process is one of the most commonly used nonconventional precise material removal processes. Electrical discharge machining (EDM) is a process for shaping hard metals and forming deep complex shaped holes by arc erosion in all kinds of electroconductive materials. Erosion pulse discharge occurs in a small gap between the work piece and the electrode. This re...

This paper presents a study of the relationship between Electrical Discharge Machining (EDM) parameters on the EDM efficiency factors using a full factorial design, based on pulse on-time, duty cycle and tool polarity parameters in EDM machining of AISI H13 tool steel. The results show that, in positive polarity, the plasma flushing efficiency and pulse efficiency increase according to the puls...

the micro wire electrical discharge machining (micro wire-edm) process is a modern machining process with various applications in manufacturing micro-parts. the recast layer remaining on the machined surfaces is an inevitable complication of this process. this layer can subsequently affect the machined parts performance. to optimize the recast layer in the micro wire-edm of the molybdenum micro...

Nowadays, Electrical Discharge Machining (EDM) has become one of the most extensively used non-traditional material removal process. Its unique feature of using thermal energy to machine hard to machine electrically conductive materials is its distinctive advantage in the manufacturing of moulds, dies and aerospace components. Howevere, EDM is a costly process and hence proper selection of its ...

Micro-electrical discharge machining is an evolution of conventional EDM used for fabricating three-dimensional complex micro-components and microstructures with high precision capabilities. The material removal process has stochastic nature and is still not fully understood. This paper presents experimental results on observing the material removal rate (MRR) in dependence of alternating machi...

Electro Discharge Machining (EDM) is a noticeable machining practice among created unconventional machining procedures for intricate, complex profiles in "hard to machine" materials, similar to heat-treated steels, composites, superalloys, ceramics, composites, carbides, and so on. In EDM, the material expulsion of the cathode is accomplished through precise controlled electric discharge (the s...

There is a huge demand in the production of microstructures by a non-traditional method which is known as Micro-EDM. Micro-EDM process is based on the thermoelectric energy between the workpiece and an electrode. Micro-EDM is a newly developed method to produce micro-parts which in the range of 50 μm -100 μm. Micro-EDM is an efficient machining process for the fabrication of a micro-metal hole ...

Electrical discharge machining (EDM) is a wellestablished non-conventional machining process, used for manufacturing geometrically complex or hard and electrically conductive material parts that are extremely difficult to cut by other conventional machining processes. But sometimes poor surface finish and low volumetric material removal rate limits its use in the industry. To diffuse this probl...

A number of WC-Co cemented carbides with 6–12 wt. % Co were machined and surface finished by grinding or Electrical Discharge Machining (EDM). EDM was executed in deionised water through several consecutive gradually finer steps. Correlations between Material Removal Rate (MRR), surface finish and EDM parameters were derived. The quality and integrity of surface finishes were analysed by Scanni...