membrane technology is used to separate water or solvents from salts or pollutants. this technique could be used for water treatment. for using of polyether sulfone (pes) hollow fiber membranes in water treatment processes, the pes hollow fiber membranes were prepared by dry-wet spinning method and heated in an oven at: 120°c, 150°c and 180°c. the effect of heating on performance of membranes w...

a membrane bioreactor (mbr) system based on a dead-end immersed hollow fiber membrane and filamentous fungus aspergillus oryzae were used for treatment of baker’s yeast wastewater. the fungus was adapted to the wastewater in the bioreactor for two weeks before starting the continuous process. average organic loading rate of 4.2 kg cod/m3.d was entered the bioreactor. mbr system was able to redu...

this study focuses on the preparation and modification of a thin-film composite (tfc) hollow fiber polyamide membrane fabricated by the interfacial polymerization of piperazine (pip) and trimesoyl chloride (tmc) on a porous polysulfone substrate. the effects of triethylenetetramine (teta) and silica nanoparticles (sio2) contents in the aqueous phase (as the additives) on the morphology and perf...

This study focuses on the preparation and modification of a thin-film composite (TFC) hollow fiber polyamide membrane fabricated by the interfacial polymerization of Piperazine (PIP) and trimesoyl chloride (TMC) on a porous polysulfone substrate. The effects of triethylenetetramine (TETA) and silica nanoparticles (SiO2) contents in the aqueous phase (as the additives) on the morphology and perf...

In this study, polyphenylsulfone (PPSU) hollow fiber membrane was fabricated via a wet spinning method with the addition of ethylene glycol (EG) in the range of 0-10 wt% as the additive. The EG was added to improve the membrane pore formation and interconnectivity for better membrane contactor performance in extracting and removing the free fatty acid (FFA) from crude palm oil (CPO). Four diffe...

in this study, the influence of the salts as an additive on the performance of the membrane was investigated and an extensive work was performed to optimize pvdf hollow fiber membranes through a response surface methodology (rsm). the prepared membranes were characterized by sem, contact angle and lep measurement. then, the rsm was used for the optimization of surface pore size, porosity and hy...

In this study, the influence of the salts as an additive on the performance of the membrane was investigated and an extensive work was performed to optimize PVDF hollow fiber membranes through a response surface methodology (RSM). The prepared membranes were characterized by SEM, contact angle and LEP measurement. Then, the RSM was used for the optimization of surface pore size, porosity and hy...

a bioreactor equipped with hollow fiber microfiltration membranes was applied for wastewater treatment. removal of chemical oxygen demand (cod) and biochemical oxygen demand (bod5) was investigated. the experimental setup consisted of influent and effluent tanks, and membrane modules using polyvinyl di–fluoride (pvdf) hollow fibers. the operation program included suction and backwash steps whic...