This paper investigates response of triangular shell strip footings situated on the sandy slope. A series of reduced-scale plate load tests were conducted to cover different parameters including three shell footing types with different apex angles in addition to a flat footing, four different distances for strip footings from the crest of the slope namely “edge distance” and reinforcement statu...

in this study, a bearing capacity device is designed and fabricated to determine the load-settlement behavior of three circular footing models resting above the ground water table. capillary rise in the studied well graded sand is measured and the level of the water table is controlled at the desired heights during each bearing capacity test. moreover, shear strength parameters and soil water r...

although bearing capacity of footings on top of slopes under monotonic loadings have been investigated widely so far, safety and bearing capacity of these structures against repeated dynamic loads have not been considered well enough. in this paper, lower bound dynamic shakedown theorem in its numerical form has been employed to firstly obtain bearing capacity of strip footings on top of slopes...

use of auxiliary elements in refining and betterment of engineering properties of soil have gained attention since a long time ago. nowadays the effectiveness and capability of the soil reinforcing technique for giving proper practical solutions in various projects have resulted in this technique quickly gaining a place in geotechnical engineering. in this paper, the results of laboratory studi...

following the recent work of the authors in development and numerical verification of a new kinematic approach of the limit analysis for surface footings on non-associative materials, a practical procedure is proposed to utilize the theory. it is known that both the peak friction angle and dilation angle depend on the sand density as well as the stress level, which was not the concern of the fo...

Use of auxiliary elements in refining and betterment of engineering properties of soil have gained attention since a long time ago. Nowadays the effectiveness and capability of the soil reinforcing technique for giving proper practical solutions in various projects have resulted in this technique quickly gaining a place in geotechnical engineering. In this paper, the results of laboratory studi...

This paper presents the results of a series of small-scale model tests and numerical analyses conducted on circular and ring model footings located near geogrid reinforced sand slopes. Layers of geogrid were used as reinforcement. For numerical analyses Finite Element Method (FEM) was used. The effects of reinforcement depth, size, number of layers, and the horizontal distance between reinforce...

In this research, the variation of ultimate bearing capacity, failure mechanism and deformation pattern of soil beneath two closely square footings have been studied using numerical methods. It is assumed that the adjacent footings are constructed on the surface of sand. The presented numerical analyses are based on explicit-finite-difference code, FLAC3D. The elasto-plastic behavior of soil is...

The lowering of the groundwater table causes the area above the water table to become unsaturated and capillary phenomena to appear in this zone. This means that the bearing capacity of shallow footings will be influenced by capillary stress or matric suction. In this research, the effect of groundwater table lowering on the bearing capacity of a shallow square model footing on dense sand has b...

The bearing capacity of strip footings on unsaturated soils is studied using slip line theory. The suction profiles considered are non-uniform with depth and correspond to vertical flow of water by infiltration or evaporation. The slip line theory assumes a plastic equilibrium state of a Mohr-Coulomb soil in which suction influences are included using the effective stress concept. This paper sh...