Magnesiothermic reduction can directly convert SiO2 into Si nanostructures. Despite intense efforts, efficient fabrication of highly nanoporous silicon by Mg still remains a significant challenge due to the exothermic reaction nature. By employing table salt (NaCl) as a heat scavenger for the magnesiothermic reduction, we demonstrate an effective route to convert diatom (SiO2) and SiO2/GeO2 int...

Owing to its simplicity and low temperature conditions, magnesiothermic reduction of silica is one of the most powerful methods for producing silicon nanostructures. However, incomplete reduction takes place in this process leaving unconverted silica under the silicon layer. This phenomenon limits the use of this method for the rational design of silicon structures. In this effort, a technique ...

Magnesium silicide (Mg2Si)/carbon nanotube (CNT) thermoelectric nanofibers for use as a flexible thermoelectric material were successfully synthesized through the combined processes of the sol-gel method, magnesiothermic reduction, and liquid-solid phase reaction. In the resulting product, each CNT was coated with Mg2Si which was an approximately 60-nm-thick single crystal. The synthesized Mg2S...

The influence of magnesium content on the mechanosynthesis of ZrB2–SiC–ZrC composite in Mg/ZrSiO4/B2O3/C mixture was investigated. Thermodynamic evaluations revealed that the amount of Mg played a main role, thereby; the overall reaction enthalpy and adiabatic temperature (Tad) changed by variation of magnesium content. According to differential thermal analysis (DTA) results, after 45min milli...

Lithium-ion batteries (LIBs) have been one of the most predominant rechargeable power sources due to their high energy/power density and long cycle life. As promising candidates for new generation negative electrode materials in LIBs, silicon has advantages specific capacity, a lithiation potential range close that lithium deposition, rich abundance earth’s crust. However, commercial use LIBs i...

the combustion process of tio2- 2mg- c and 3tio2-4al-3c systems in a tubular furnace was investigated. tic has been synthesized by the magnesiothermic reaction from a mixture of compacted powders of tio2, mg and charcoal as starting materials in the presence and absence of nacl. the effects of temperature, pressure, and the stoichiometry ratio in the reaction yield have been studied. the result...

The combustion process of TiO2- 2Mg- C and 3TiO2-4Al-3C systems in a tubular furnace was investigated. TiC has been synthesized by the magnesiothermic reaction from a mixture of compacted powders of TiO2, Mg and charcoal as starting materials in the presence and absence of NaCl. The effects of temperature, pressure, and the stoichiometry ratio in the reactio...

In this study, Boron carbide was synthesized using Mesoporous Carbon CMK-1, Boron oxide, and magnesiothermic reduction process. The Effects of temperature and magnesium grain size on the formation of boron carbide were studied using nano composite precurser containg mesoporous carbon. Samples were leached in 2M Hydrochloric acid to separate Mg, MgO and magnesium-borat phases. SEM, XRD and Xray ...

silica exists in rice husk, an agriculture waste, as a naturally occurring phase. in first step, acidic pre-treatment and calcination of the rice husk were performed to obtain nano-silica, in which various sizes of the nano-silica, totally with sizes under 80 nm, were achieved. second, to reduce nano-silica to elemental si and subsequently formation of the composite, mg used as the reducing age...