نتایج جستجو برای: Mechanical part
تعداد نتایج: 868783 فیلتر نتایج به سال:
the treatment of in completely formed pulpless teeth has presented considrable problems. these teeth have wide open apexes and the walls of the root canal diverge toward the apical tissues. mechanical preparation cannot be done in the normal manner beacause of the large initial size and the taper of apical part of the canal , a mechanical stop cannot be produced at the apex of the canal and , t...
introduction: multileaf collimator (mlc) is state of the art among the radiation field shaping systems for conformal radiotherapy techniques. some advantages of this system are as follow: reduction of treatment time, higher precision in conforming the radiation field to the projection of the target volume and lowering the chance of errors made by technologists. the purpose of this research was ...
in this study, the effects of oleothermal modification on physical and mechanical peroperties of fir wood (abeis sp.) blocks were examined. at first, some blocks of fir wood with 5 × 20 × 120 cm dimensions were prepared. the blocks were treated in soybean oil. the effects of 3 factors such as treatments temperature (180and 200 °c), holding time (12 and 15 h) and initial moisture content of wood...
Introduction: Multileaf collimator (MLC) is state of the art among the radiation field shaping systems for conformal radiotherapy techniques. Some advantages of this system are as follow: reduction of treatment time, higher precision in conforming the radiation field to the projection of the target volume and lowering the chance of errors made by technologists. The purpose of this research was ...
The mechanical properties (fracture strength, fracture toughness, and Vickers microhardness) of MgAl2O4 and x wt% ZrO2–MgAl2O4 (1 # x # 30) hot-pressed materials were measured at room temperature. Two kinds of materials, which were prepared from either ball-milled or attrited powders, were investigated. Compared with an unreinforced spinel, a twofold (or greater) increase in both strengthening ...
High speed and absence of a precise control over pressure distribution confine sheet Electromagnetic Forming into a die to simple shapes having shallow depth. It is possible to reach a higher depth by using a convex punch instead of a concave die. In this study, sheet Electromagnetic Forming on a punch and sheet Electromagnetic Forming into a die are investigated. The electromagnetic part of th...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید