a micro-channel heat exchanger reactor with different micro-baffle shapes has been studied numerically. governing equations were solved base on the finite volume method with fluent software. in upper section, oxidation reaction of methanol was occurred and in lower section, steam reforming of methanol was done. two sections were separated with solid part which played as heat exchanger and trans...

because of its kinetic nature and computational advantages, the lattice boltzmann method (lbm) has been well accepted as a useful tool to simulate micro-scale flows. the slip boundary model plays a crucial role in the accuracy of solutions for micro-channel flow simulations. the most used slip boundary condition is the maxwell slip model. the results of maxwell slip model are affected by the ac...

steam reforming integrated with oxidation of methanol was considered with numerical simulation. the parallel micro-channels with circular cross sections were used. because when the catalytic deposited inside the rectangular micro-channels, it fills up the edges. hence, the approximation of a cylindrical channel is appropriate. effect of this changing in cross section was considered and results ...

micro scale gas flows has attracted significant research interest in the last two decades. in this research, the fluid flow of gases in the stepped micro-channel at a wide range of knudsen number has been analyzed with using the lattice boltzmann (mrt) method. in the model, a modified second-order slip boundary condition and a bosanquet-type effective viscosity are used to consider the velocity...

The effect of catalyst particle size on dehydration of methanol to dimethyl ether is investigated using fixed bed and micro-channel reactors at different temperatures and weight hourly space velocities. The experiments were carried out at 290 and 320oC. The space velocities were changed from 10 up to 90h-1 and from 1.22 to 3.65h-1 for fixed bed and micro-channel reactors, respectively. Consider...

Final quality of products/services starts with suppliers in the supply chain. Problems can occur if suppliers do not deliver the quantities requested in full, on time, or buyers select suppliers solely on the basis of lowest price. Supplier selection has been studied for large businesses but not for very small (micro) businesses. Therefore, a survey was administered to micro-businesses to deter...

Micro-expression is gaining more attention in both the scientific field and the mass media. It represents genuine emotions that people try to conceal, thus making it a promising cue for lie detection. Since micro-expressions are considered almost imperceptible to naked eyes, researchers have sought to automatically detect and recognize these fleeting facial expressions to help people make use o...

gas mixing in a t-shape micro mixer has been simulated using the direct simulation monte carlo (dsmc) method. it is considered that the adequate mixing occurs when the mass composition of the species, co or n2, deviates below 1 % from their equilibrium composition. the mixing coefficient is defined as the ratio of the mixing length to the main channel’s height. as the inlet kn increases, while ...

Because the electrical installations are nowadays a lot of options and variants, it is necessary to evaluate these complex installation process from several perspectives and objectively. Due to the complexity of evaluation of electrical installation is design a methodology that uses multi-criteria analysis MCA.