with the aim of identifying failure mechanism in oriented strand boards, failure behavior of wood strands under tensile load was investigated using acoustic emission technique. resinated and unresinated strands were arranged at top, middle and bottom section of the board before pressing. tensile and acoustic emission tests were performed simultaneously on treated and control samples. using tens...

the objective of this experimental work was to assess the drop impact damage onwoven glass fibre reinforced polymer composite laminate through online method and offlinemethod. online monitoring of drop impact damage was carried out by acoustic emission (ae)technique and ae signals during the drop impact test were captured. from the analysis of aesignals, it was observed that as the impact energ...

In this study, the longitudinal and hoop tensile strengths of an industrial ±55° Glass Reinforced Epoxy (GRE) pipe with eighteen layers as well as the associated failure mechanisms are determined. To obtain the longitudinal and hoop tensile strengths values, three specimens are cut from the studied GRE pipe in each direction. A comparison is done between both the strength values, and the fractu...

On the rotor comprehensive fault simulation testbed, characteristics of acoustic emission signal of different crack rotors in various depth and conditions are analyzed by the acoustic emission extraction experiment. The noiseeliminating method of the acoustic emission signal was researched by the wavelet packet technique, the characteristics of acoustic emission signal of the rotor crack was al...

The present paper describes the basic principles of acoustic emission (AE) tomography. This method uses acoustic emission events as point sources and combines the usual iterative localization algorithm of AE testing with algorithms for travel time tomography like ART (algebraic reconstruction technique). The procedure is equivalent to the solution of the generalized inverse localization problem...

One of the methods used to investigate the damaged zone in rock structure is the acoustic emission method. This method is based on receiving the elastic waves that are produced by deformation and cracking of the rock mass around the underground excavation. In this research, a study is conducted on the rock samples by a numerical method to investigate the damaged zone caused by the excavat...