نتایج جستجو برای: acrylic polymer
تعداد نتایج: 101376 فیلتر نتایج به سال:
Superabsorbent polymer was prepared by graft polymerization of acrylic acid onto the chain of carboxymethyl cellulose. This superabsorbent polymer was further treated by the solvent precipitation method. We found that the water absorption rate of the treated polymer was greatly increased and the microstructure of the treated polymer was changed from close-grained structures to loose macropores....
Acrylic polymer that is highly stable against chemicals and is a good choice when concrete is subject to chemical attack. In this study, self-compacting concrete (SCC) made using acrylic polymer, nanosilica and microsilica has been investigated. The results of experimental testing showed that the addition of microsilica and acrylic polymer decreased the tensile, compressive and bending strength...
VOC advantages of radiation-curable coatings, but present novel design opportunities because dispersion in water decouples the polymer o r oligomer molecular weights from the formulation viscosity. Coatings designers can then begin to make use of the full range of polymer architectures possible for polyester, urethane and acrylic polymers. This article focuses on radiation curing systems based ...
An electroswitchable and tunable biofuel cell based on the biocatalyzed oxidation of glucose is described. The anode consists of a Cu(2+)-poly(acrylic acid) film on which the redox-relay pyrroloquinoline quinone (PQQ) and the flavin adenine dinucleotide (FAD) cofactor are covalently linked. Apo-glucose oxidase is reconstituted on the FAD sites to yield the glucose oxidase (GOx)-functionalized e...
BACKGROUND The hydrogel based system is found to be rarely reported for the delivery of hydrophobic drug due to the incompatibility of hydrophilicity of the polymer network and the hydrophobicity of drug. This problem can be solved by preparing semi-interpenetrating network of cross-linked polymer for tuning the hydrophilicity so as to entrap the hydrophobic drugs. The current study is to devel...
Janus particles with differentially degradable compartments were prepared by electrohydrodynamic (EHD) co-jetting and subsequent controlled crosslinking. These bicompartmental particles are composed of an interpenetrating polymer network of poly(ethylene oxide) and poly(acrylamide-co-acrylic acid) in one hemisphere and a crosslinked copolymer of dextran and poly(acrylamide-co-acrylic acid) segm...
In a novel application, infrared spectroscopic ellipsometry is used to provide clear evidence for the formation of a covalent bond at a polymer/polymer interface. Specifically, there is evidence for the formation of a Si-O-C bond resulting from a reaction between the silyl (SiH) group of a poly(hydrogen methyl siloxane) crosslinker used in poly(dimethyl siloxane) and the carboxylic acid group o...
Polymer modified concrete (PMC) consists of Portland cement concrete with a polymer modifier. Its advantages are proper bonding strength to substrate concrete, high tensile and flexural strength and low amount of shrinkage and permeability. Using PMC overlays can be considered as a method for preservation of damaged concrete structures due to their suitable performance and durability. In this r...
Micron sizes solder metallurgical joints have been applied in a thin film application of anisotropic conductive film and benefited three general advantages, such as lower joint resistance, higher power handling capability, and reliability, when compared with pressure based contact of metal conductor balls. Recently, flex-on-board interconnection has become more and more popular for mobile elect...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید