rotary atomizers are commonly used in spray dryers to atomize feed. one destructive effect of wheel rotation is the creation of a vacuum inside the wheel that conducts hot air from the chamber into the wheel and can lead to atomizer blockage and an explosion. the present work determined the air-pumping characteristics of a rotary atomizer with a 50 mm wheel diameter. the vacuum pressure and pow...

in the present study, saffron was dried using a heat pump-assisted hybrid photovoltaic-thermal solar dryer. the effect of different drying air temperatures at three levels (40, 50, and 60oc) and two different modes of the dryer (with and without heat pump system) were investigated on drying behaviour of saffron. after collecting the pertinent data, eleven drying models were used to describe dry...

Silicone based oil is heated in the boiler of the diffusion pump and the vaporized oil rises in the central tower and streams out of directional flutes directed downward in the pump throat. This allows air molecules to dissolve in the gaseous oil (gas dissolved in gas). As the oil-air mixture cools (due to water cooling coils wrapped around the pump throat) the oil condenses and returns to liqu...

In residential heat pump systems, the motivation for secondary loop systems is to allow for the use of flammable or toxic refrigerants with lower global warming potentials than the currently employed HFC refrigerants. The addition of radiant panels as integral building components (embedded in concrete at construction or attached to the underside of wood flooring) is becoming more common. Combin...

Introduction:  The use of carbon dioxide blower has been recognized as the standard of care in patients undergoing beating coronary artery bypass grafting (CABG) due to higher solubility and lower risk of embolization. On the other hand, the compressed air blower has gone out of use since air can be easily trapped and is less soluble which can cause coronary embolism. The prese...

Pump intake is designed to provide adequate water supply to pumps. It is essential to design the pump intake to provide fairly uniform and swirl free flow to pumps. However, it is not always possible due to site constraints. Investigation of pump intake is required prior to installing the pumps at site. There are two approaches (experimental and numerical) followed for such investigation. The p...

2.2 Heating and cooling systems The power of the global heating/cooling system has been voluntarily oversize in order to generate an artificial climate whatever the season in the large room. The mains components are: a reversible air-to-water heat pump: 40 kW a second heat pump (only chilled water) : 24 kW an electric coil (24 kW) two regulated fans (supplied & exhausted air) : 0-6000 m3/h a ru...