the drilling is well known as one of the most common hole making processes in the industry.due to close tolerance requirement for drilled holes in the most of work pieces, onlinecontrolling of the diameter of drilled holes seems to be necessary. in the current work, an onlinedimensional controlling system was developed for drilling process. doing this, drilling processwas executed in different ...

The drilling is well known as one of the most common hole making processes in the industry.Due to close tolerance requirement for drilled holes in the most of work pieces, onlinecontrolling of the diameter of drilled holes seems to be necessary. In the current work, an onlinedimensional controlling system was developed for drilling process. Doing this, drilling processwas executed in different ...

Machining of thin-walled (aluminium alloy) aerospace structures is a critical process due to the high warpage. Current practices in the fixture design and the choice of cutting parameters rely solely on conservative guidelines and the designer’s experience. This paper presents evaluation of clamping force to fix the work piecein aVacuum fixture using Vacuum pump. The ISCARonline calculator is u...

The present paper discusses on development of fuzzy rule based models (FRBMs) for predicting cutting force and surface roughness in milling operation. The models use TakagiSugeno-Kang-type (TSK-type) fuzzy rule to study the effect of four (input) cutting parameters (cutting speed, feed rate, radial depth of cut and axial depth of cut) on outputs (cutting force and surface roughness). The approp...

in order to help in the engineering design of rice harvesting machines, there is a need to have exact information concerning the physical and mechanical properties of rice stems. the cutting force for rice stems, therefore, was measured by designing and fabricating a static and dynamic shear test apparatus. the effects of moisture levels and the cross-sectional area of stem as well as the varie...

Helical milling operations are used to generate or enlarge boreholes by means of a milling tool. The bore diameter can be adjusted through the diameter of the helical path. The kinematics of helical milling on a three axis machine tool is analysed firstly. The relationships between processing parameters, cutting tool geometry characters with machined hole feature are formulated. The feed motion...

Helical milling operations are used to generate or enlarge boreholes by means of a milling tool. The bore diameter can be adjusted through the diameter of the helical path. The kinematics of helical milling on a three axis machine tool is analysed firstly. The relationships between processing parameters, cutting tool geometry characters with machined hole feature are formulated. The feed motion...

Based on the cutting force theory, the cutting stress in end milling operation was predicted satisfactorily through simulation of using finite element method. The mechanistic force models were introduced in high accuracy force predictions for most applications. The material properties in the simulations were defined based on the cutting force theory, as a function of strain and strain rate wher...

Cutting fluids, usually in the form of a liquid, are applied to the chip formation zone in order to improve the cutting conditions. Cutting fluid can be expensive and represents a biological and environmental hazard that requires proper recycling and disposal, thus adding to the cost of the machining operation. For these reasons dry cutting or dry machining has become an increasingly important ...

Abstract: This article aims to study the effects of shock-disturbed cracks on the cutting features of cone bits. By utilizing the Walsh’s model, a crack model was established for the damaged rock surrounding the induced hole, the intrusive coefficient of the cone bit was derived, and the drilling rate equation around the induced hole was formulated. The effects of crack density and disturbance ...