This paper reports on a numerical study of the six-band metamaterial absorber composed of two alternating stack of metallic-dielectric layers on top of a continuous metallic plane. Six obvious resonance peaks with high absorption performance (average larger than 99.37%) are realized. The first, third, fifth, and the second, fourth, sixth resonance absorption bands are attributed to the multiple...

A novel design of metamaterial (MTM) based absorber with reduced cell size is proposed in this paper. The absorber is designed to operate in the mid infrared (IR) regime using gold nano-pillar inclusions embedded in a dielectric spacer. The absorption band can be controlled by adjusting the nano-pillar’s properties. Numerical simulations have been conducted to investigate the effect of these in...

In this paper, a compact plasmonic metamaterial absorber for terahertz frequencies is proposed and simulated. The absorber is based on metamaterial graphene structures, and benefits from dynamically controllable properties of graphene. Through patterning graphene layers, plasmonic resonances are tailored to provide a dual band as well as an improved bandwidth absorption. Unit cell of the design...

A simulation study of a Cu(In1 - xGax)Se2 (CIGS) thin film solar cell has been carried out with maximum efficiency of 24.27 % (Voc = 0.856 V, Jsc = 33.09 mA/cm(2) and FF = 85.73 %). This optimized efficiency is obtained by determining the optimum band gap of the absorber and varying the doping concentration of constituent layers. The Ga content denoted by x = Ga/(In + Ga) is selected as 0.35 wh...

In this paper, an ultra-wideband metamaterial absorber is designed and simulated. The proposed absorber is planar and low profile. It is made of a copper sheet coated with two dielectric layers. Each unit cell of the metamaterial structure is composed of multiple metallic split rings, which are patterned on the top and middle boundaries of the dielectrics. The designed absorber utilizes differe...

Dual band metamaterial perfect absorbers with two absorption bands are highly desirable because of their potential application areas such as detectors, transceiver system, and spectroscopic imagers. However, most of these dual band metamaterial absorbers proposed were based on resonances of metal patterns. Here, we numerically and experimentally demonstrate a dual band metamaterial perfect abso...

An efficient resolution for ultrathin metamaterial perfect absorber (MPA) is proposed and demonstrated in the VHF radio band (30-300 MHz). By adjusting the lumped capacitors and the through vertical interconnects, the absorber is miniaturized to be only λ/816 and λ/84 for its thickness and periodicity with respect to the operating wavelength (at 102 MHz), respectively. The detailed simulation a...

In this work, a system consisting of a main structure with a nonlinear tuned vibration absorber having a hardening spring attached to it is considered. The nonlinearity in the absorber's spring is a cubic nonlinearity and is obtained by attaching two additional, relatively soft, similar linear springs to the absorber's mass. These added springs are attached to the absorber's mass in such a way ...

A metamaterial electromagnetic wave absorber consisting of a big circular ring patch with four smaller suppression circular rings is presented in this report. The metamaterial electromagnetic wave absorber introduces the concept of size reduction by suppressing the resonance frequency. An FR4 substrate was used and the incidental wave angles were varied from 0 0 to 60 0 . Simulations results sh...

Metamaterial absorbers can provide good solutions for radar-cross-section (RCS) reduction. In spite of their attractive features of thinness, lightness, and low cost, resonant metamaterial absorbers have a drawback of narrow bandwidth. For practical radar applications, wideband absorbers are necessary. In this paper, we propose a wideband-switchable metamaterial absorber using liquid metal. In ...