نتایج جستجو برای: beam resonator
تعداد نتایج: 123221 فیلتر نتایج به سال:
In this article, M2 factor of a thin disk laser with unstable resonator in two regimes is calculated numerically. In the first case, thermal effects are ignored and the parameters of beam width, divergence angle, radius of wave front curvature and finally, M2 factor of laser beam are calculated by using generalized beam parameters. These calculations show that the beam quality of the laser is d...
The output beam quality of multi transverse modes of laser, are relatively poor. In order to obtain better beam quality, one may use an aperture inside the laser resonator. In this case, various transverse modes can be selected. We have selected various transverse modes both by simulation and doing experiment. By inserting a circular aperture inside the diode end-pumped Nd:YAG pulsed laser reso...
When an input Gaussian beam is improperly aligned and mode-matched to a stable optical resonator, the electric field in the resonator couples to off-axis spatial eigenmodes. We show that a translation of the input axis or a mismatch of the beam waist to the resonator waist size causes a coupling of off-axis modes which is inphase with the input field. On the other hand, a tilt of the input beam...
The quartz crystal used in the reference oscillator in a wireless communication transceiver is among the most difficult to integrate on chip. On-chip devices capable of matching its Q (on the order of 10,000) and temperature stability (<35ppm over 0-70C) are generally unavailable. Recently, an on-chip vibrating clamped-clamped beam (CC-beam) micromechanical resonator based on MEMS technology ha...
We present a compact diagnostic breadboard that is based on an optical ring resonator for measuring beam quality and pointing of single-frequency continuous wave lasers at a wavelength of 1064 nm. To determine the beam quality of the coherent test beam, this optical resonator is used to perform a mode decomposition into Hermite-Gaussian modes. For our laser system, a power fraction in the funda...
We generalize the Robinson stability criteria, for a charged particle beam interacting with the radio-frequency cavity resonator that is responsible for accelerating it, to the case that the resonator is equipped with a delayed voltageproportional feedback.
We present a numerical investigation of the ray dynamics in a paraxial optical cavity when a ray-splitting mechanism is present. The cavity is a conventional two-mirror stable resonator and the ray splitting is achieved by inserting an optical beam splitter perpendicular to the cavity axis. We show that depending on the position of the beam splitter the optical resonator can become unstable and...
We present a numerical investigation of the ray dynamics in a paraxial optical cavity when a ray splitting mechanism is present. The cavity is a conventional two-mirror stable resonator and the ray splitting is achieved by inserting an optical beam splitter perpendicular to the cavity axis. We show that depending on the position of the beam splitter the optical resonator can become unstable and...
Analytical methods are presented for transverse mode analysis of a laser resonator having spherical mirrors with a Gaussian reflectivity profile. The modes of this type of resonator have a form similar to that of the conventional Gaussian modes, but it is necessary to define an additional beam parameter to meet the selfconsistency requirement for resonator modes. Stability of both the conventio...
Self-sustained mechanical vibrations of a disc-type microfabricated resonator were experimentally observed when a continuous wave (CW) laser beam was focused on the periphery of the disc (for a 40 μm diameter resonator, natural frequency 0.89MHz, the laser power above a 250 W threshold was required). A theoretical model for self-oscillatory behavior has been developed based on FEM analysis of a...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید