Membrane separation is known as an efficient technique for the oily wastewater treatment. Therefore, in the present study, sulfonated poly (ether ether ketone) (SPEEK) was introduced into the polysulfone (PSF) solution in order to enhance the hydrophilicity and the membrane structure for the oil–water separation. The hollow fiber membranes were fabricated via a phase-inversion process. The memb...

co2/ch4 gas separation is a very important applicatable process in upgrading the natural gas and landfil gas recovery. in this work, to investigate the membrane separation process performance, the gas permeation results andco2/ch4 separation characteristics of different prepared membranes (via blending different molecular weights of polyethylene glycol (peg) as a modifier with acrylonitrile-but...

a microporous bisphenol a diglycidyl ether (dgeba) epoxified-polyethersulfone (pes) blend membrane (epes membrane) was prepared through dry-wet phase inversion. this study attempts to correlate the changes in membrane physical and chemical properties when the epes membranes were exposed to different durations of dry-phase inversion, towards the separation efficiency of carcinogen chromium (vi)....

Integrally-skinned asymmetric Polyetherimide/Poly (vinyl alcohol) (PEI/PVA) hollow fber membranes for pervaporation dehydration were fabricated by non-solvent induced phase inversion. PVA inside the PEI matrix could be crosslinked to provide membrane performance stability during long term operation. The effects of different PEI/PVA blend ratio, external coagulant type and...

A microporous bisphenol A diglycidyl ether (DGEBA) epoxified-polyethersulfone (PES) blend membrane (EPES membrane) was prepared through dry-wet phase inversion. This study attempts to correlate the changes in membrane physical and chemical properties when the EPES membranes were exposed to different durations of dry-phase inversion, towards the separation efficiency of carcinogen chromium (VI)....

In this study, neat HDPE and HDPE/PE-g-MA/EVA blend membranes were fabricated via thermally induced phase separation (TIPS) method and their fouling behaviors were examined using filtration of BSA protein. Membranes were characterized using FESEM, AFM, ATR-FTIR analyses and porosity measurement. Fouling behavior of membranes was analyzed using the resistance-in-series (RIS), classic and combine...

Blend membranes of chitosan and poly (ethylene oxide) with different molecular weights of 100,000 and 600,000 were prepared by the solution cast technique. The Chitosan-PEO blend membranes were produced to study their water adsorptions capacity and characteristics of the haemodialysis membrane application. An increase in the water adsorption capacity of chitosan-PEO blend membranes compared to ...

TThis study investigated the water absorption of chitosan, collagen, and chitosan/collagen blend membranes exposed to gamma-ray irradiation. These membranes were produced via the solvent evaporation method. All membranes then underwent irradiation at 15 or 25 kGy gamma-ray doses, while membranes without irradiation were used as controls. After immersing the membranes in distilled water for up t...

Polyethersulfone (PES)-based anion exchange blend membranes were prepared from quaternized-PES (Q-PES) and N-Methyl-2-pyrrolidone (NMP) casting solutions with water as coagulant via non-solvent induced phase inversion. The compatibility of the blend system was investigated through thermodynamic studies while membrane formation was determined using the cloud point techni...