conclusions the fixator-assisted lengthening plate technique helps to maintain the stability and alignment at both sides of an osteotomy during tibial elongation. it allows the early removal of the external fixator immediately after lengthening is completed. this technique can be applied in children with open physes and in patients with a narrow medullary canal who are unsuitable for limb lengt...

The study compared the bone response to xenogenic screws and metallic screws of a similar design in a canine femur. The xenogenic bone screws and metallic bone screws were inserted into the femur diaphyses of dogs. Radiological and histological responses to the xenogenic bone screws were determined in canine bone and micro-computed tomography evaluation of bone mass and bone density parameter w...

Nanosized iron oxide particles exhibit osteogenic and radiopaque properties. Thus, iron oxide (Fe3O4) nanoparticles were incorporated into a biodegradable polymer (poly-L-lactic acid, PLLA) to fabricate a composite bone screw. This multifunctional, 3D printable bone screw was detectable on X-ray examination. In this study, mechanical tests including three-point bending and ultimate tensile stre...

conclusions time plays an important role in treatment results of femoral neck fractures. to treat the fractures, closed reduction and fixation using cannulated screws may still be the best option. objectives the present study aimed to evaluate long-term results of delayed fixation of femoral neck fractures using cannulated screws. patients and methods this retrospective descriptive-analytical s...

Cancellous screws are designed to optimize fixation in metaphyseal bone environments; however, certain clinical situations may require the substitution of cortical screws for use in cancellous bone, such as anatomic constraints, fragment size, or available instrumentation. This study compares the biomechanical properties of commercially available cortical and cancellous screw designs in a synth...

BACKGROUND Various fabrication methods are used to improve the stability and osseointegration of screws within the host bone. The aim of this study was to investigate whether roughened surface titanium screws fabricated by electron beam melting can provide better stability and osseointegration as compared with smooth titanium screws in sheep cervical vertebrae. METHODS Roughened surface titan...

BACKGROUND Loosening of screws is a common problem in orthopedic and maxillofacial surgery. Modifying the implant surface to improve the mechanical strength of screws has been tried and reported. We developed screws coated with fibroblast growth factor-2 (FGF-2)-apatite composite layers. We then showed, in a percutaneous external fixation model, that this composite layer had the ability to hold...

Stable insertion of large Schanz screws behind an intramedullary (IM) nail when lengthening over nails (LON) may be difficult due to the limited bone stock. Additionally, the highly probable contact between the screws and IM nail (which is difficult to avoid) increases the likelihood of infection spreading from the skin via Schanz screws directly to the IM nail. A new device for LON has been de...

INTRODUCTION Orthopaedic fracture fixation plates are applied using metal bone screws. Surgeons do this manually by “feel” without monitoring the torque applied. Few studies have measured the stripping torque of bone screws in human bone [1-3]. No studies have measured stripping torque in the synthetic bones increasingly being used in biomechanical studies. The present aim was to measure stripp...

PURPOSE OF THE STUDY To compare the anchorage strength of Socon CS cannulated pedicle screws (B. Braun, Aesculap) with that of Socon screws in human cadaver vertebrae, using pull-out strength testing. MATERIAL Twelve samples involving T12 to L3 vertebrae were prepared and a total of 20 pedicle screws, 10 Socon CS and 10 Socon screws, were inserted in them. All screws were 55 mm in length and 6 ...