A target changeable palm-top size x-ray tube was realized using pyroelectric crystal and detachable vacuum flanges. The target metals can be exchanged easily by attaching them on the brass stage with carbon tape. When silver and titanium palates (area: 10 mm(2)) were used as targets, silver Lα and titanium K lines were clearly observed by bombarding electrons on the targets for 90 s. The intens...

the brass tubes with foam cores of alsi7sic3, alsi7sic3fe1 and alsi7sic3fe3 were produced as the crush-boxes with circle and square cross-section. then axial compressive behavior and energy absorption capability of the foam-filled tubes were investigated during the quasi-static progressive plastic buckling. the uniaxial compressive stress–strain curves of the foam-filled brass tubes exhibited t...

a brass vortex tube (vt) with interchangeable parts is used to determine the optimum cold end orifice diameter, main tube length and diameter. experiments were carried out to study the effects of operating pressure as well. it is shown that there is an optimum value for cold end orifice diameter, which is equal to 4mm and there is an optimum value for cold and hot exit temperature difference at...

Figure 1. Spray gun used in electron microscopy. A. Assembled spray gun. B. Outer envelope. C. Insert tube. The component parts have the following specifications: 1. Nozzle head X inch threads, 0.030 inch aperture. 2. "O" ring, Y8 inch outside diameter (o.d.) and Y inch inside diameter (i.d.). S. X8 inch threads, tapered end. 4. Brass tubing %6 inch o.d.; 0.035 inch wall. .946 inch threads, mov...

The issue of the influence of wall vibrations on the behavior of wind instruments is still under debate. The mechanisms of vibroacoustic couplings involved in these vibrations are difficult to investigate, as fluid-structure interactions are weak. Among these vibroacoustic interactions, the present study is focused on the coupling between the internal acoustic field and the mechanical behavior ...

Nucleate pool boiling heat transfer coefficients of Al2O3-water and TiO2-water nanofluids have been experimentally measured on three horizontal tubes with different materials and similar roughness under atmospheric pressure. Results revealed that the presence of nanoparticles in the base fluid leads to an increase in pool boiling heat transfer coefficients on stainless steel and brass tubes in ...

A preliminary study of the feasibility of using piezo-transducer arrays, for detecting flaws in flat aluminum plates and steel tubing, is being performed at The University of Tennessee. The sensor arrays are designed for embedding in aluminum plates and brass tubes. Various forms of defects are placed on the test specimens. Preliminary experiments are carried out using both flat aluminum plate ...

This study addresses the development of a compact reactor for oxidative steam-reforming of methanol (OSRM) to produce hydrogen in autothermal mode for fuel cells. The string reactor uses catalytically active brass wires with a diameter of 500 mm placed in parallel into a tube. The micro-channels in the reactor for gases are formed between the wires presenting hydrodynamics similar to the one in...

BACKGROUND Embouchure dystonia is a focal task-specific dystonia affecting the complex interplay of lower facial, jaw, and tongue muscles in musicians playing brass or woodwind instruments. Although it is highly disabling for affected patients, little is known about the pathophysiologic basis of this rare movement disorder. METHODS We therefore studied sensorimotor activation patterns during ...