In this paper the buckling coefficient of FGM rectangular plates calculated by the new version of differential quadrature method (DQM). At the first the governing differential equation for plate has been calculated and then according to the new version of differential quadrature method (DQM) the existence derivatives in equation , convert to the amounts of function in the grid points inside of ...

Using doubly-clamped silicon (Si) microbeam resonators, we demonstrate sub-attogram per Hertz (ag/Hz) mass sensitivity, which is extremely high sensitivity achieved by micro-scale MEMS mass sensors. We also characterize unusual buckling phenomena of the resonators. The thin-film based resonator is composed of a Si microbeam surrounded by silicon nitride (SiN) anchors, which significantly improv...

existence of cracks in industrial structures is one of the important causes of their failure, especially when they are subjected to important axial compressive forces that might lead to buckling. therefore, it must be considered in stress analysis and designing and loading of such structures. in this paper, the buckling and post-buckling behaviors of stainless-steel cracked plates under axial c...

The paper shows the effects of behaviour of loading during the buckling process on the value of critical force and initial stability of post-buckling path for elastic, non-prismatic columns. Perturbation method combined with Croll’s manoeuvre makes it possible to derive general formulae for the first or the second correction of the force, and hence to analyze stability in the post-buckling rang...

this paper proposed analytical solutions for the buckling analysis of rectangular single-layered graphene sheets under in-plane loading on all edges simply is supported. the characteristic equations of the graphene sheets are derived and the analysis formula is based on the nonlocal mindlin plate. this theory is considering both the small length scale effects and transverse shear deformation ef...

The abrupt change in material properties across the interface between different materials can result in large inter-laminar stresses leading to delimitation, cracking, and other damage mechanisms which result from the abrupt change of the mechanical properties at the interface between the layers. Initially the uncertainty in material properties at micro level is finally reflected as macro level...

The abrupt change in material properties across the interface between different materials can result in large inter-laminar stresses leading to delimitation, cracking, and other damage mechanisms which result from the abrupt change of the mechanical properties at the interface between the layers. Initially the uncertainty in material properties at micro level is finally reflected as macro level...

The nonlinear mechanical response of carbon nanotubes, referred to as their "buckling" behavior, is a major topic in the nanotube research community. Buckling means a deformation process in which a large strain beyond a threshold causes an abrupt change in the strain energy vs. deformation profile. Thus far, much effort has been devoted to analysis of the buckling of nanotubes under various loa...

In this paper, tests on flexural buckling ( Lateral – Torsional ) of cold-formed steel(CFS) lipped Channel beams under restrained boundary conditions are described Two point loading for flexural tests have been established for 3.0m span to obtain uniform bending moment. The section sizes selected for testing are 100x50x10 mm, 100x50x15 mm and 100x50x20 mm with 1.6mm and 2.0mm thickness for the ...

in this paper, the finite element analysis of stability problem of vehicle composite drive shafts subjected to torsional loading is studied. first, using the minimum total potential energy principle, the governing equations are derived and then they are solved by finite element method. the initial geometrical imperfection which is usually in the form of radial displacement, is taken into consid...