SnCl4/nano-sawdust was prepared as a carbohydrate-based catalyst containing of tin bearing cellulose units. The catalyst was characterized by X-ray diffraction (XRD), fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FESEM) and energy dispersive X-ray spectroscopy (EDS). The catalyst was applied successfully as a readily available, inexpensive, biodeg...

This study investigated catalytic microwave pyrolysis of Douglas fir sawdust pellets using carbon catalysts produced from corn stover. The effects of catalyst to biomass ratio on the bio-oil, syngas, and biochar yields were determined. Functional groups (carbonyls, phenolics, lactones, carboxyls) of carbon catalysts and GC/MS analysis were used to study the catalytic pyrolysis of Douglas fir sa...

A novel generic method of silica supported catalyst system generation from a fluid state is presented. The technique is based on the combined flow and radiation (such as microwave, thermal or UV) induced co-assembly of the support and catalyst precursors forming nano-reactors, followed by catalyst precursor decomposition. The transformation from the precursor to supported catalyst oxide state c...

the conversion of the cellulose into 5-hmf would experience three steps, cellulose to glycose, glycose to fructose and fructose to 5-hmf. chloride ion can break down the hydrogen bond in cellucose, chromium can catalyze the isomerization of glycose to fructose, and the high temperature is helpful to cyclohydration of fructose to 5-hmf. in this paper, the sawdust has been directly degraded into ...

in this research, the removal of malachite green dye from textile wastewaters using polyaniline coated onto sawdust (pani/sd) has been investigated. ammonium peroxodisulphate was used as chemical oxidant for polymerization of polyaniline directly on the surface of sawdust. the effects of some important parameters such as ph, initial concentration, sorbent dosage, exposure time and temperature o...

The conversion of the cellulose into 5-HMF would experience three steps, cellulose to glycose, glycose to fructose and fructose to 5-HMF. Chloride ion can break down the hydrogen bond in cellucose, chromium can catalyze the isomerization of glycose to fructose, and the high temperature is helpful to cyclohydration of fructose to 5-HMF. In this paper, the sawdust has been directly degraded i...

The controllable preparation of nano-gold catalyst maintains a challenge. Except the parameters have been revealed before, here we'd like to show that controllable preparation of active nano-gold catalyst can be achieved using chlorine as an indicator. By tracing the chlorine concentration in the washing step, a series of Au/Fe2O3 catalysts were prepared with co-precipitation method. The applyi...

Rhodamine B (RhB) is a water-soluble fluorescent dye that is often used to determine flux and flow direction in biotechnological and environmental applications. In the current research, RhB in soluble (termed free) and virus-bound (termed nano-bound) forms was used as an efficiency indicator for three environmental processes. The degradation of free and nano-bound RhB by (i) direct UV photolysi...

Hydrogen production from biomass pyrolysis is economically and technologically attractive the perspectives of energy environment. The two-stage catalytic pine sawdust for hydrogen-rich gas investigated using nano-NiO/Al2O3 as catalyst at high temperatures. influences residence time (0–30 s) temperature (500–800 °C) on performance are examined in distribution products, composition, properties. r...