In the application of multiple Carbon Fiber-Reinforced Plastic (CFRP) plates onto a structural steel member, stepping of the CFRP plate ends is often adopted to prevent debonding. This approach requires the nonuniform extension of CFRP plate lengths. In this study, to shorten the length of CFRP plates, a nonuniform overlapping arrangement of several CFRP plate ends was proposed and the theoreti...

the effect of steel plate thickness on the repair effectiveness of rc beam is presented in this paper. a total of four beams were tested, one beam repaired by cfrp with a thickness of 1.2 mm and used as a control beam, and three beams repaired by a steel plate. steel plates with a thickness of 2 mm, 3 mm, and 4 mm were used in repairing the beams. the maximum load-carrying capacity, deflection ...

Carbon Fiber Reinforced Polymer (CFRP) laminates are applied to many aerospace structures. For these laminated CFRP structures, it is quite difficult to detect internal damage such as delamination, matrix cracks, and local fiber breakages. Carbon fibers are adopted as reinforcement in CFRP and it is an excellent electric conductor at the same time. The carbon fiber has been used as a strain sen...

Laminated Carbon Fiber Reinforced Polymer (CFRP) composites are very effective in weight saving in aeronautical structural components. For these laminated CFRP structures, it is, however, difficult to detect damage such as delamination, matrix cracks, and local fiber breakages caused by low velocity impact loading In the previous study in 2009, Time Domain Reflectometry (TDR) method was applied...

This paper presents results from Finite Element Modelling (FEM) of steel-concrete composite beams strengthened with prestressed Carbon Fibre Reinforced Polymer (CFRP) plate. For the purpose of this study, three beams were strengthened using prestressed CFRP plate with three different levels of induced prestressing force. The models were developed using ANSYS FE package. The results of an experi...

Research on the use of CFRP materials for retrofit and strengthening of steel bridges and structures has increased in recent years. In order to implement these types of strengthening systems to longer span members, it is important to establish an effective method to splice adjacent lengths of CFRP laminates. This paper describes an experimental program to investigate the bond behavior of carbon...

This paper summarizes an experimental program supported by an analytical modeling study undertaken to investigate the bond behavior of carbon fiber reinforced polymer (CFRP) materials used for strengthening steel structures. The experimental program consisted of three double-lap shear coupon tests and five large-scale beam tests. Different methods to reduce the bond stress concentrations near t...

End anchors have been shown to significantly reduce premature plate end debonding failure of plate bonded strengthened reinforced concrete (r. c.) beams. One of the main interest in designing end anchors is to determine the minimum or optimal length of end anchors for a given thickness and height of the end anchor. This paper presents experimental and numerical studies in determining those opti...

Delamination monitoring in carbon fiber reinforced polymer (CFRP) laminated plates is crucial to ensure the integrity and safety of the structures that accommodate the plates. To identify delaminations in CFRP laminated plates, the two-dimensional (2D) curvature mode shape method is a prevailing method that features instant and simultaneous determination of the presence and location of the dela...

We proposed and studied an impact detection system based on a fiber Bragg grating (FBG) sensor array and multiple signal classification (MUSIC) algorithm to determine the location and the number of low velocity impacts on a carbon fiber-reinforced polymer (CFRP) plate. A FBG linear array, consisting of seven FBG sensors, was used for detecting the ultrasonic signals from impacts. The edge-filte...