outdoor experiments on a once-through single glazed solar air heater with perforated metal absorber plate were conducted to determine the practical effect of absorber plate porosity as well as suction air flow rate on the collector thermal efficiency and its total pressure drop. three aluminum absorber plates were made perforated by drilling circular holes with different diameter/pitch ratios i...

This paper represents the evaluation of capacitance of different conducting bodies are calculated using finite element method (FEM). There are different numerical methods like Finite Difference method, Method of Moment and Monte Carlo methods. But the finite element method has more advantages. The surfaces are discretized using triangular subsections. Finite element method is a suitable method ...

This paper tries to achieve a solution for problems that concern condensation around a flat plate, circular and elliptical tube in by numerical and analytical methods. Also, it calculates entropy production rates. At first, a problem was solved with mesh dynamic and rational assumptions; next it was compared with the numerical solution that the result had acceptable errors. An additional suppor...

This paper reports a novel actuating design that uses the shear deformation of a piezoelectric actuator to deflect a bulge-diaphragm for driving an array microdroplet ejector. In essence, we employed a circular-shaped actuator poled radial direction with remnant polarization normal to the actuating electric field for inducing the piezoelectric shear effect. The array microdroplet ejector consis...

A new reflecting surface capable of simulating identical reflecting properties of a metallic plate with rectangular corrugations is reported. The new surface which is fabricated with a low loss dielectric plate of uniform thickness .One surface of the plate is periodically loaded with a grill structure of conducting wires and the other surface is completely metalized with copper. Depending on t...

This paper reports a novel actuating design that uses the shear deformation of a piezoelectric actuator to deflect a bulge-diaphragm for driving an array microdroplet ejector. In essence, we employed a circular-shaped actuator poled radial direction with remnant polarization normal to the actuating electric field for inducing the piezoelectric shear effect. The array microdroplet ejector consis...

Electronic speckle pattern interferometry (ESPI) was used for tuning and visualization of natural frequencies of a square laminate plate with rounded corners and chamfers. The plate was excited to resonant vibration by a sinusoidal acoustical source, which provided a continuous range of audio frequencies. Numerical calculations of resonant frequencies and mode shapes based on a finite element p...

We report a novel strategy to achieve simultaneous one-step in-situ self-desalting and enrichment (OISE) of peptides/proteins on a facilely fabricated patterned MALDI steel plate with a circular paraffin-steel-polystyrene structure. The OISE plate could efficiently segregate salts from both analytes and matrices while retaining both analyte and matrix concentrate, and facilitating them to form ...

In this investigation Rayleigh-Ritz variational method has been applied to determine the least natural frequency coefficient for the title problem. Classical plate theory assumptions have been used to calculate strain energy and kinetic energy. Coordinate functions are combination of polynomials which satisfy boundary conditions at the outer boundary and trigonometric terms. In the second part ...

Well-preserved siliceous plates representing multiple species of euglyphids are described from a Middle Eocene maar lake deposit located near the Arctic Circle in northern Canada. Siliceous plate morphotypes including scutiform, rectangular, hexagonal, oval and circular body forms, six apertural plate types containing from five to thirteen teeth and spine plates, are documented. Many plate type...