One of the most important methods to produce sponge iron is coal based reduction of iron ore. Direct reduction methods based on coal are being improved due to the abundance of coal sources and its lower cost in comparison with natural gas. Volatile materials in coal play an important role in the reduction of iron oxides. In this study, noncoking coal with high volatile materials from Iran and c...

one of the most important methods to produce sponge iron is coal based reduction of iron ore. direct reduction methods based on coal are being improved due to the abundance of coal sources and its lower cost in comparison with natural gas. volatile materials in coal play an important role in the reduction of iron oxides. in this study, noncoking coal with high volatile materials from iran and c...

INTRODUCTION This report presents the results of two trials conducted with the Blast Furnace Granular Coal Injection System at Bethlehem Steel Corporation's Bums Harbor Plant. The trials were conducted using granulated and pulverized high volatile coal from Colorado. The first trial was conducted to quantify the effect that a high volatile western coal, Colorado Oxbow, has on the blast furnace ...

The pyrolysis of coal and biomass is generally reported as the mass yield of released chemicals at various temperatures, pressures, heating rates and coal or biomass type. In this work, a new coal-biomass type number, NCT, is introduced. This number is constructed from the mass fractions of carbon, hydrogen, and oxygen in the ultimate analysis. This number is unique for each coal or biomass typ...

Pulverized coal injection has assisted the steel industry to lower operating costs, extend coke oven life and lower greenhouse emissions. As the understanding of the impact of quality of the injected coal has increased, there has been a shift from high volatile thermal coals to low volatile semi-anthracites. A heat and mass model was used to investigate the impact of the injected coal propertie...

The volatile matter of non-coking coal was used for the reduction of hematite in argon atmosphere at nonisothermal condition. A thermal gravimeter furnace enable to use an 80 mm-height crucible was designed for the experiments to measure the weight changes of about 10 grams samples. A two-layered array of coal and alumina and four-layered array of iron oxide, alumina, coal and alumina was u...

This paper describes the application of innovative hydrothermal technology on local municipal solid waste (MSW) to produce low chlorine content solid co-firing fuel with coal. Raw MSW was treated at temperatures ranging from 210 to 235°C with 30 to 90 minutes holding period. The process yielded slump products which were then naturally dried to 5% moisture content, resulted in dry products with ...

Simultaneous thermogravimetry-mass spectrometry studies of a pyrolytic decomposition of mixtures of different plastic wastes/coking coal were carried out. The investigation was performed at temperatures up to 1000oC in a helium atmosphere under dynamic conditions at a heating rate of 25 oC/min. Five thermoplastics, commonly found in municipal wastes: low density polyethylene (LDPE), high densit...

To evaluate the utility potential of pretreated biomass in blast furnaces, the fuel properties, including fuel ratio, ignition temperature, and burnout, of bamboo, oil palm, rice husk, sugarcane bagasse, and Madagascar almond undergoing torrefaction and carbonization in a rotary furnace are analyzed and compared to those of a high-volatile coal and a low-volatile one used in pulverized coal inj...

Four different types of coal have been pyrolyzed in a laminar flow, drop tube furnace in order to establish a relationship between polycyclic aromatic compound (PAC) evolution and mutagenicity. Temperatures of 900K to 1700K and particle residence times up to 0.3 sec were chosen to best simulate conditions of rapid rate pyrolysis in pulverized (44-53 microns) coal combustion. The specific mutage...