نتایج جستجو برای: collector efficiency

تعداد نتایج: 393654  

Journal: :journal of agricultural science and technology 2012
h. mortezapour b. ghobadian m. h. khoshtaghaza s. minaee

in this paper, the performance evaluation of a two-way hybrid photovoltaic/thermal (pv/t) solar collector was analytically and experimentally carried out. mathematical expressions for operating parameters in glass to glass and glass to tedlar pv/t solar collectors were developed and experimentally validated by a glass to tedlar pv/t solar collector system. also the influence of air flow rate on...

Journal: :transport phenomena in nano and micro scales 0
a.r. noghrehabadi department of mechanical engineering, shahid chamran university, ahvaz, i. r.iran e. hajidavaloo department of mechanical engineering, shahid chamran university, ahvaz, i. r.iran m. moravej department of mechanical engineering, shahid chamran university, ahvaz, i. r.iran

one of the effective methods to improve the thermal efficiency of solar collectors is using nanofluids as the coolant. the present study experimentally investigated the effect of sio2/water nanofluid with 1% mass fraction on the performance of a symmetric collector, i.e. conical solar collector. the conical solar collector with 1 m2 area and normal to the earth was tested in ahvaz, a city in th...

Journal: :journal of heat and mass transfer research 0
aminreza noghrehabadi shahid chamran university of ahvaz, faculty of engineering, department of mechanical engineering ebrahim hajidavaloo shahid chamran university of ahvaz, faculty of engineering, department of mechanical engineering mojtaba moravej azad street . no#35 behbahan, iran

the shape of a solar collector is an important factor in solar-to-thermal energy conversion. conical shape is one of the stationary and symmetric shapes that can be employed as a solar water heater. flow rate of working fluid on the solar collector has an important effect on the efficiency of the collector. the present study is an experimentally investigated of the performance of the solar coni...

A.R. Noghrehabadi E. Hajidavalloo M. Moravej

One of the effective methods to improve the thermal efficiency of solar collectors is using nanofluids as the coolant. The present study experimentally investigated the effect of SiO2/water nanofluid with 1% mass fraction on the performance of a symmetric collector, i.e. conical solar collector. The conical solar collector with 1 m2 area and normal to the earth was tested in Ahvaz, a city in th...

In this study, thermal performance of the collector with analytic and quasi-dynamic method is evaluated based on energy balance equations for each part of the U-pipe evacuated tube solar collector. Using this approach, effect of different parameters such as tube size, overall heat loss coefficient, absorber tube absorptivity, mass flow rate and air layer thermal resistance on thermal performanc...

Journal: :international journal of nano dimension 0
sh. delfani department of installations, building and housing research center (bhrc), tehran, po box 13145-1696, iran. m. karami school of mechanical engineering, college of engineering, university of tehran, tehran, po box 14395-515, iran. m. a. akhavan bahabadi school of mechanical engineering, college of engineering, university of tehran, tehran, po box 14395-515, iran.

in the present work, a prototype of a new type of solar collectors, which called direct absorption solar collector, was built and its thermal performance is experimentally compared with conventional flat plate solar collector under transient and steady state conditions. different volume fractions of multi wall carbon nanotubes in water and ethylene glycol mixture (70%:30% in volume) were used a...

In this study, exergy analysis of a flat plat solar collector in a closed circuit has been performed using existing experimental data and the effects of utilization of the collector with upper, lower and side reflectors alone and together with lenses on exergy efficiency have been considered. Then, based on a mathematical model, optimization analysis has been performed. Unlike the past studies,...

In the present work, a prototype of a new type of solar collectors, which called Direct Absorption Solar Collector, was built and its thermal performance is experimentally compared with conventional flat plate solar collector under transient and steady state conditions. Different volume fractions of multi wall carbon nanotubes in water and ethylene glycol mixture (70%:30% in volume) were used a...

In the present work, a prototype of a new type of solar collectors, which called Direct Absorption Solar Collector, was built and its thermal performance is experimentally compared with conventional flat plate solar collector under transient and steady state conditions. Different volume fractions of multi wall carbon nanotubes in water and ethylene glycol mixture (70%:30% in volume) were used a...

2007
Stephen M. Blackburn Kathryn S. McKinley Stephen M Blackburn Robin Garner Chris Hoffmann Asjad M Khan Kathryn S McKinley Rotem Bentzur Amer Diwan Daniel Feinberg Daniel Frampton Samuel Z Guyer Martin Hirzel Antony Hosking Maria Jump Han Lee J Eliot B Moss Aashish Phansalkar Darko Stefanović Thomas VanDrunen Daniel von Dincklage

No current garbage collector combines space efficiency, low collector times, and mutator (application) locality for contemporaneously allocated objects. For example, free-list allocation coupled with mark-sweep collection achieves space efficiency, but poor mutator locality. On the other hand, contiguous (bump-pointer) allocation with copying collection provides mutator locality but poor space ...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید