Bamboo flour (BF) was grafted onto lactide (LA) in the molten state using stannous octoate as a catalyst to form BF-g-LA. Then, polylactic acid (PLA) was blended with BF (PLA/BF, 85/15 wt %) to prepare PLA/BF/BF-g-LA composites using BF-g-LA as a compatibilizer. The grafting rate of BF was characterized using infrared testing and elemental analysis. To investigate the effect of BF-g-LA on the p...

This paper presents the preparation and mechanical properties of compatibilized compositionally graded Polyethylene/ low density polyethylene (LDPE)/ modified montmorillonite (MMT) nanocomposites prepared by solution and melt mixing techniques. Use of polyethylene glycol as compatibilizer improves compatibility of modified montmorillonite and low density polyethylene.  Comparisons between two t...

Toughening of polyamide 6 (PA6)/ Nanoclay (NC) nanocomposites with styrene-ethylene/butadiene-styrene copolymer (SEBS) using maleated styrene-ethylene/butadiene-styrene copolymer (mSEBS)/ as a compatibilizer were investigated by blending them in a co-rotating twin-screw extruder. Response surface method of experimental design was used for optimizing the material and processing parameters. Effec...

N6) made with or without PP-g-MAH as compatibilizer are investigated. The blend filaments produced at the take-up speeds of 300 and 800 m/min were drawn with draw ratio of 3.5 and 2, respectively. Effects of blending of N6 with PP on birefringence , crystalline, and amorphous orientation factors of the composite filaments are studied. The amorphous orientation factor, fam of PP was found to inc...

Poly(lactic acid) (PLA) and starch copolymers are obtained by reactive blending varying the starch compositions from 0 to 60%. PLA is functionalized with maleic anhydride (MA), obtaining PLA-g-MA copolymers using dicumyl peroxide as an initiator of grafting in order to improve the compatibility and interfacial adhesion between the constituents. PLAþ starch blends without a compatibilizer do not...

Terminally hydroxylated polypropylene (PP) synthesized by a chain transfer method was grafted to graphene oxide (GO) at the chain end. Thus obtained PP-modified GO (PP-GO) was melt mixed with PP without the use of a compatibilizer to prepare PP/GO nanocomposites. Mechanical and electrical properties of the resultant nanocomposites and reference samples that contained graphite nanoplatelets, par...

Poly(lactic acid) (PLA) was melt mixed in a laboratory extruder with poly(butylene adipate-co-terephthalate) (PBAT) and poly(butylene succinate) (PBS) in the presence of polypropylene glycol di glycidyl ether (EJ400) that acted as both plasticizer and compatibilizer. The process was then scaled up in a semi-industrial extruder preparing pellets having different content of a nucleating agent (LA...

In the present investigation, a compatibilized blend of thermoplastic polyurethane (TPU) and polydimethylsiloxane (PDMS) is prepared by using copolymer of ethylene and methyl acrylate (EMA) as a reactive compatibilizer. Detailed in vitro biocompatibility studies were carried out for this compatibilized blend and the material was found noncytotoxic towards L929 mouse fibroblast subcutaneous conn...