in this paper, moment-curvature behavior and ductility of prestressed concrete members based on nonlinear analysis is investigated. influence of various design parameters on ductility of flexural members is determined according to appropriate materials models for stress-strain curves of concrete, prestressing steel and conventional reinforcements. parameters studied include reinforcing index (ω...

In this paper, moment-curvature behavior and ductility of prestressed concrete members based on nonlinear analysis is investigated. Influence of various design parameters on ductility of flexural members is determined according to appropriate materials models for stress-strain curves of concrete, prestressing steel and conventional reinforcements. Parameters studied include reinforcing index (ω...

In this paper, moment-curvature behavior and ductility of prestressed concrete members based on nonlinear analysis is investigated. Influence of various design parameters on ductility of flexural members is determined according to appropriate materials models for stress-strain curves of concrete, prestressing steel and conventional reinforcements. Parameters studied include reinforcing index (ω...

Based on tests on six L-shaped RC columns with 500 MPa steel bars, the effect of axial compression ratios and stirrup spacing on failure mode, bearing capacity, displacement, and curvature ductility of the specimens is investigated. Test results show that specimens with lower axial load and large stirrup characteristic value (larger than about 0.35) are better at ductility and seismic performan...

Abstract To avoid brittle collapse of reinforced concrete (RC) structures, RC elements such as beams, columns, and shear walls are invited to ensure a minimum level ductility. In this paper, an analytical method for predicting the curvature ductility factor confined columns is developed. The stress–strain model provided by Eurocode 2 adopted, effective lateral confining pressure calculated acco...

methods are proposed to develop idealized moment-curvature response curves of slender rectangular rc wall sections with uniformly distributed longitudinal reinforcement, using limit states, namely, cracking of concrete in tension, tensile yielding of reinforcement layers, and compression failure of concrete. it is recommended that tensile yielding of an inner layer of reinforcement is considere...

The objective of this study is to investigate the effectiveness of externally bonded CFRP sheets to increase the flexural strength of reinforced high strength concrete (HSC) beams. Four-point bending flexural tests to complete failure on six concrete beams, strengthened with different layouts of CFRP sheets were conducted. Three-dimensional nonlinear finite element (FE) models were adopted by A...