The production of customized Ti-6Al-4V ELI dental implants by electron beam melting technology makes it possible to mass produce customized dental implants which introduce a porous surface to promote better osseointegration. By fabricating the root-form implant and the abutment as one piece, the authors expect to eliminate fracturing at the abutment screw and prosthetic screw. This paper descri...

background and aims. the aim of this study was to determine the stress patterns within an implant and the effect of different types of connections on load transfer. materials and methods. three different types of implant-abutment connections were selected for this study. sample a: 1.5-mm deep internal hex corresponding to a lead-in bevel; sample b: a tri-channel internal connection; and sample ...

A five unit fixed dental prosthesis with a pier abutment poses a unique challenge of a fulcrum and torquing forces at the intermediate abutment. The use of a rigid connector can lead to localization of forces on the pier abutment. Therefore, the use of a non-rigid connector as a stress breaker has been advocated to alleviate the situation. The following case report describes the factors associa...

Polyetheretherketone (PEEK) is a semi-crystalline linear polycyclic thermoplastic that has been proposed as a substitute for metals in biomaterials. PEEK can also be applied to dental implant materials as a superstructure, implant abutment, or implant body. This article summarizes the current research on PEEK applications in dental implants, especially for the improvement of PEEK surface and bo...

PURPOSE Preparation of a one-piece dental implant abutment is often needed to achieve a proper emergence profile for a definitive restoration. However, this procedure may compromise osseointegration through the production of heat. The aim of this study was to measure heat production during implant abutment preparation with different volumes of water irrigation using a one-piece implant system. ...

The abutment(s) of a partial fixed dental prosthesis (PFDP) should have a minimal total occlusal convergence (TOC), also called a taper, in order to ensure adequate retention of a PFDP that will be made for the abutment(s), given the height of the abutment(s). This article reviews the concept of PFDP abutment TOC and presents an alternative definition of what TOC is, defining it as the extent t...

Background and Aim: Dental implants with angled abutments are often inserted in the anterior maxillary region due to the status of the residual ridge and aesthetic considerations. The purpose of this study was to assess stress and strain distributions in the premaxillary bone around dental implants by means of finite element analysis (FEA). Materials and Methods: Four three-dimensional (3D) fi...

STATEMENT OF PROBLEM Loosening or fracture of the abutment screw are frequent complications in implant dentistry and are detrimental to the long-term success of the restorations. However, little is known about the factors influencing the stability of the screw-abutment complex. PURPOSE The purpose of this study was to investigate the influence of lubricant action during implant assembly on sc...

background and aims. because of compromised angulations of implants, the abutments are sometimes prepared. the purpose of this study was to investigate the effect of removing one wall of the implant abutment on the retention of cement-retained crowns. materials and methods. four prefabricated abutments were attached to analogues and embedded in acrylic resin blocks. the first abutment was left ...

BACKGROUND Dental implants require regular maintenance. It is crucial that the instrument used for maintenance be able to remove plaque and calculus from the implant surface effectively and efficiently, while causing minimal damage to its circumference. Some ultrasonic scalers may be useful for implant maintenance; however, no clinical study has examined this. This study evaluated the treatment...