This paper is concerned with asphaltene deposition in fluid flowing through pipelines. Brownian diffusion and drag, gravitational, thermophoresis, buoyancy, and shear removal are considered as possible mechanisms in the asphaltene deposition process. The thermo-physical properties of the fluid were obtained from Iranian oil fields. A model was used in the pipeline deposition modeling to predict...

this paper is concerned with asphaltene deposition in fluid flowing through pipelines. brownian diffusion and drag, gravitational, thermophoresis, buoyancy, and shear removal are considered as possible mechanisms in the asphaltene deposition process. the thermo-physical properties of the fluid were obtained from iranian oil fields. a model was used in the pipeline deposition modeling to predict...

In this study, asphaltene deposition from crude oil has experimentally and theoretically been studied using a test loop and an accurate temperature monitoring during a laminar flow. The effects of oil velocity and surface temperature on the thickness of asphaltene deposition were investigated. The results show that asphaltene deposition thickness increases by increasing surface temperature. As ...

This article discusses the mechanisms of particle deposition onto cleanroom surfaces. The main mechanism for particles above about 0.5μm is gravitational settling. Turbulent deposition and electrostatic attraction can also occur at all particle sizes, and for particles below 0.5μm Brownian diffusion is important. Measurements of particle deposition rates (PDRs) were made of particles 10μm on wi...

In this work, the natural depletion process in sandstone and carbonate cores was modeled to investigate the asphaltene deposition mechanisms. A new permeability reduction correlation was proposed based on the Minssieux model that considers a combination of surface deposition, pore throat plugging, and filtration cake mechanisms. The results showed that the filtration cake is a dominant asphalte...

This study has been investigated, the effects of three different polar polyacrylamides (anionic, cationic, and nonionic) on asphaltene deposition in porous media. All experiments were carried out in various dead oil flow rates (0.2, 0.1 and 0.02 cc/min) and different polymer concentrations (500, 2500, 4000 ppm). The results indicated that asphaltene precipitation was affected by the presence of...

The capture efficiency of the small aerosol particle is strongly influenced by the structure of fibrous layers. This study presents particle deposition and dendrite formation on different arrangements of binary fibers. 2-D numerical simulation is performed using the open source software of OpenFOAM. In the instantaneous filtration of a single fiber, obtained results are in good agreement with th...

this study has been investigated, the effects of three different polar polyacrylamides (anionic, cationic, and nonionic) on asphaltene deposition in porous media. all experiments were carried out in various dead oil flow rates (0.2, 0.1 and 0.02 cc/min) and different polymer concentrations (500, 2500, 4000 ppm). the results indicated that asphaltene precipitation was affected by the presence of...