objective(s): it has been suggested that the efficiency of dry poder inhaler (dpi) is generally low. therefore, the aim of the present research work was to use the solvent treatment of the carrier in dpiformulations to see the possibility of inducing desirable characteristics.   materials and methods: lactose sieve fractions of 63-90 μm were submerged in ethanol or 80% v/v ethanol, methanol or ...

BACKGROUND Delivery of powder formulations to the nose is an attractive alternative for many drugs and vaccines. This study compared the regional nasal deposition and clearance patterns of lactose powder delivered by the OptiNose powder device (Opt-Powder; OptiNose US Inc., Yardley, PA, USA) to that of liquid aerosol administered via a traditional hand-actuated liquid spray pump (Rexam SP270, R...

  Objective(s): It has been suggested that the efficiency of dry poder inhaler (DPI) is generally low. Therefore, the aim of the present research work was to use the solvent treatment of the carrier in DPIformulations to see the possibility of inducing desirable characteristics.   Materials and Methods: Lactose sieve fractions of 63-90 μm were submerged in ethanol or 80% v/v etha...

Department of Chemical Biology, College of Key Laboratory for Chemical Biology of Fuji Spectrochemical Analysis & Instrumentation Xiamen University, Xiamen, 361005, Ch +86-0592-2181728 State Key Laboratory of Cellular Stress Bio School of Life Sciences, Xiamen University, X † Electronic supplementary informatio procedures; synthesis and characterizat course studies on cellular uptake of SA-pNIR...

Segregation and chemical inhomogeneity are well-known problems in powder metallurgy and are also an issue for new applications of powder mixtures, for example as starting materials for severe plastic deformation. In this study, Cu-coated Fe powder was prepared via immersion deposition, inductively hot-pressed and subsequently deformed using high-pressure torsion. The homogeneity of the pressed ...

Silane and hydrogen discharges are widely used for the deposition of silicon thin film solar cells in large area plasmaenhanced chemical vapor deposition reactors. In the case of microcrystalline silicon thin film solar cells, it is of crucial importance to increase the deposition rate in order to reduce the manufacturing costs. This can be performed by using high silane concentration, and usua...

Fused Deposition Modeling (FDM) is one from basic Rapid Prototyping (RP) technologies used in technical practice. In this contribution are presented basic information about common and advanced materials used for realization of products by Fused Deposition Modeling Rapid Prototyping technology application. In different Rapid Prototyping Technologies the initial state of material can come in eith...

The purpose of this research is to understand how the process parameters surrounding the Direct Metal Deposition (DMD) process affect the properties of the deposition. The powder used in this research is pre-alloyed titanium powder (Ti-6Al4V), containing 6% wt. aluminum and 4% wt. vanadium. The DMD process involves injecting metallic powder into a weld pool created by a high power industrial la...

Direct Metal Laser Sintering (DMLS) was introduced to meet the objective of producing metal parts directly from CAD data. CRDM has accumulated six years of experience in applying this technique, mostly to prototyping parts for evaluation. For some applications, such as blow moulds, porosity generated in DMLS has proved to be beneficial, but for others a concession on tolerances or finish are ne...