Tidal energy is the most foreseeable form of renewable energy. Tidal energy can be harnessed by tidal barrage, tidal fence and tidal current technologies. Present efforts are focused on diffuser augmented tidal turbines that exploit the kinetic energy of the tidal currents. The power output by a tidal turbine is directly proportional to the cube of velocity of incoming fluid flow. Thus, even a ...

In this paper, a self-adaptive flange is proposed for the wind turbine shrouded by a flanged diffuser to reduce the wind loads acting on the flanged diffuser at high wind velocities. The self-adaptive flange can maintain the advantages of the flanged diffuser at wind velocities lower than the rated velocity and reduce the wind loads acting on the diffuser and blades at higher wind velocities. N...

It is quite well known that the diffusers are required for efficient conversion of the dynamic head generated by the impeller in a centrifugal fan. Hence the flow into the diffuser passage plays a crucial role in determining the efficiency of conversion. The flow in the region bounded by the impeller exit and the diffuser entry i.e. the radial clearance space is generally considered to be highl...

The present paper reports measurements carried out in a centrifugal compressor equipped with double row of low solidity partial vane diffuser. Performance of the compressor is measured with three sets of double row diffusers with different radial spacing between the diffusers. From these measurements best configurations are identified and static pressures on the diffuser walls and probe measure...

This paper presents an optimization design method for centrifugal compressors based on one-dimensional calculations and analyses. It consists of two parts: (1) centrifugal compressor geometry optimization based on one-dimensional calculations and (2) matching optimization of the vaned diffuser with an impeller based on the required throat area. A low pressure stage centrifugal compressor in a M...

Preliminary tests on the feasibility of using conductivity measurements for diffuser control have shown that brix and conductivity profiles along a diffuser are very similar in shape. The influence of temperature, concentration, pH-value, nonsolubles and sulphated ash on conductivity of cane juice was investigated and simultaneous on-line measurements were carried out to establish shortand long...

The effects of the diffuser vane on the performances of the multistage centrifugal pump were investigated experimentally, taking account of the interactions among the diffuser vane, the return vane, and the next stage impeller. It is very important to match well the diffuser vane with the return vane, for improving the hydraulic efficiency of the pump. The efficiency may be more improved by mak...

This paper describes curtain airbag gas delivery system development work using CFD analysis. The objective of developing gas delivery system was to achieve uniform inflation and reasonable time to position for oblique pole test with 5 %ile female. CFD analysis has been conducted to design gas delivery system of 3 row curtain airbag. The gas delivery system consists of T-diffuser and flexible ga...

The effects of using a wind acceleration device (wind lens) with vertical-axis wind turbines in wind tunnel experiments were examined. A wind lens consists of a diffuser and flanges, and this study investigated the optimum parameters of their configuration with regard to the power augmentation of the turbines. The wind lens with a flat-panel-type diffuser demonstrated power augmentation by a fa...