When the out-of-plane stiffness of a beam is remarkably lower than the in-plane stiffness, the lateral-torsional buckling occurs. In this study, the behavior of mono-symmetric I-beams with discrete torsional and lateral bracings under the concentrated moment is investigated using the finite element analyses. Then, based on the numerical analyses, equation for the stiffness requirement is propos...

In buildings with triangular plan, the center of mass and rigidity cannot geometrically match all possible directions of the earthquake. This will result in torsional moments in the stories causing the building to rotate around the center of rigidity. In this paper, via response spectrum analysis (RSA) and nonlinear static analysis, the seismic behavior of 5-, 10- and 15-story steel structures ...

This paper describes the design, testing, and finite element modeling, of a proofof-concept eccentrically braced frame specimen utilizing a hybrid rectangular shear link. The link is self-stabilizing and does not require lateral bracing, making it suitable for use in steel bridge piers where lateral bracing can be difficult to provide (building applications are possible as well). Equations used...

Abstract A computational study was conducted to examine the seismic performance of steel moment‐resisting frames (MRFs) provided with chevron concentric braces. Such systems are widely used for buildings in Japan. Nonlinear finite‐element‐method models were validated against data and observations from previously tested chevron‐braced MRF specimens. The conduct a parametric understand how cyclic...

the most conventional method for lateral bracing of steel frames is using diagonal and x steel braces. in conventional method, braces of frame emplace in one bay or more, relative to structural requirement, from first to last story without displace the braces emplacement on height as columnar form. this pattern is a preliminary and simplest bracing template that the generally codes present base...

Abstract The ways of designing and building steel girder bridges with a composite concrete deck vary much between different parts the world. A bridge system twin I‐girders or concept multiple (more than two) girders can be used. design use details secondary systems also lot. In order to give horizontal stabilization distribute loads, bracing bracings are often Although not so common, used verti...

abstract to resist lateral loads in concrete buildings, usually systems such as flexural frame, shear wall or their combinations are used. using x form of cable bracing in order to strengthen concrete buildings is a new method. this system is more economical compared with the other systems due to cables low weight, high tensile resistance, easy performance and less maintenance problems. in this...