in this study, the possibility of producing wood-plastic panels was studied using two different blending methods including melt blend and dry blend. wood-plastic panels were made from recycled high density polyethylene (as resin) and mdf waste (as natural fiber) at 60, 70 and 80% by weight filler loading. nominal density and dimensions of the panels were 1g/cm3 and 35×35×1 cm, respectively. the...

In the pharmaceutical industry, the three most common granulation processes for solid dosage form production are wet granulation, dry granulation (roller compaction) and direct blending. Yet, despite being well-established techniques, each has its drawbacks. Moisture-activated dry granulation (MADG) was developed in response to the difficulties experienced with wet granulation, in terms of endp...

a microporous bisphenol a diglycidyl ether (dgeba) epoxified-polyethersulfone (pes) blend membrane (epes membrane) was prepared through dry-wet phase inversion. this study attempts to correlate the changes in membrane physical and chemical properties when the epes membranes were exposed to different durations of dry-phase inversion, towards the separation efficiency of carcinogen chromium (vi)....

in the present study, floating drug delivery beads (fdds) were prepared with sodium alginate/ starch blend as a matrix, sodium hydrogen carbonate as a pore forming agent, methyl cellulose as a binder and barium chloride solution as a hardening agent. in order to prepare the beads with different porosity and morphology the ratio between pore forming agent to polymer blend and ratio of the consti...

A microporous bisphenol A diglycidyl ether (DGEBA) epoxified-polyethersulfone (PES) blend membrane (EPES membrane) was prepared through dry-wet phase inversion. This study attempts to correlate the changes in membrane physical and chemical properties when the EPES membranes were exposed to different durations of dry-phase inversion, towards the separation efficiency of carcinogen chromium (VI)....

Food commonly is associated with emotion. The study was designed to determine if a spice blend (cinnamon, ginger, nutmeg, and cloves) high in antioxidants can evoke changes in consumer emotions. This was an exploratory study to determine the effects of these four spices on emotions. Three extruded, dry snack products containing 0, 4, or a 5% spice blend were tested. One day of hedonic and just-...

according to high importance of sodding for fast creating green beds in all seasons, this experiment carried out with aimidentifying suitable substrate and covering plant including two lawn genus and dichondra with blend seed. the trial carried out as factorial experiment with three factors based on complete block design in three replications. experimental factors consisted of planting networks...

In the present study, Floating Drug Delivery Beads (FDDS) were prepared with sodium alginate/ starch blend as a matrix, sodium hydrogen carbonate as a pore forming agent, methyl cellulose as a binder and barium chloride solution as a hardening agent. In order to prepare the beads with different porosity and morphology the ratio between pore forming agent to polymer blend and ratio of the co...

An experiment evaluated the effects of six corn processing methods in feedlot diets containing 30% (DM basis) wet distillers grains plus solubles (WDGS). Treatments consisted of whole corn, dry-rolled corn, a dry-rolled/ high-moisture corn mix, high-moisture corn, steam flaked corn, and fine ground corn. The ADG was highest for steers receiving dry-rolled corn, high-moisture corn, or a 50:50 bl...

To prevent the 7 to 11 million metric tons of waste foundry sand (WFS) produced annually in the USA from entering landfills, current research is focused on the reuse of WFSs as soil amendments. The effects of different WFS-containing amendments on turfgrass growth and nutrient content were tested by planting perennial ryegrass (Lolium perenne L.) and tall fescue (Schedonorus phoenix (Scop.) Hol...