Increasingly restrictive emission regulations and renewed focus on energy efficiency drive the current researches to find alternative fuels and their related better combustion strategies. In this regard, dual fuel engines, in which natural gas fuel is used as a main fuel and diesel fuel is employed as a pilot fuel, have received considerable attention. However, poor fuel utilization efficiencie...

nitrogen oxides (nox) contribute to a wide range of environmental effects including the formation of acid rain and destroy ozone layer. in-cylinder high temperature flame and high oxygen concentration are the parameters which affect the nox emissions. the egr system is a very effective way for reducing nox emission from a diesel engine (via reduction of these parameters), particularly at the hi...

in this study a heat exchanger is designed for cooling exhaust gas and an experiment is carried out to investigate the effect of exhaust gas recirculation (egr) temperature on destruction of the fuel’s availability due to combustion processes in idi diesel engine cylinder. to serve this aim an exergy analysis is conducted on the engine cylinder which provides all the availability terms by which...

Vehicle Emission is one of the main causes of environmental damage. Vehicle engines produce carbon dioxide (CO2), hydrocarbon (HC), Nitrogen oxides (NOx) and many other harmful substances. An investigation was conducted using a compression-ignition engine fuelled with different ratios of blends of diesel and biodiesel at different EGR rates. The effects of different ratios of fuel blends and EG...

In this study a heat exchanger is designed for cooling exhaust gas and an experiment is carried out to investigate the effect of Exhaust Gas Recirculation (EGR) temperature on destruction of the fuel’s availability due to combustion processes in IDI diesel engine cylinder. To serve this aim an exergy analysis is conducted on the engine cylinder which provides all the availability terms by which...

in this study, a numerical simulation using the cfd software, fluent, has been conducted to examine the effect of various shapes of the venturi component sections in order to find the optimum venturi specifications to increase the egr rate with minimum pressure loss at the part load operation range. the cfd results reveal that the venturi should be precisely optimized to introduce the required ...

Nitrogen oxides (NOx) contribute to a wide range of environmental effects including the formation of acid rain and destroy ozone layer. In-cylinder high temperature flame and high oxygen concentration are the parameters which affect the NOx emissions. The EGR system is a very effective way for reducing NOx emission from a diesel engine (via reduction of these parameters), particularly at the...

One promising way to achieve low temperature combustion regime is the use of a large amount of cooled EGR. In this paper, the effect of injection timing on low temperature combustion process and emissions were investigated via three dimensional computational fluid dynamics (CFD) procedures in a DI diesel engine using high EGR rates. The results show when increasing EGR from low levels to levels...

operating an engine with homogeneous charge compression ignition (hcci) technique is a promising technique to lower nox and pm emissions of engines while achieving high efficiency and lower fuel consumption. nevertheless, applications for hcci are still limited due to the absence of a definite means to control ignition timing and narrow operating region. a single cylinder diesel engine with com...

In this paper, an experimental investigation on achieving ultra-low emissions in diesel engine was carried out using intake premixed methanol and EGR technology. The influence of introduction method combustion performances were studied comprehensively. results show that NOx (<0.4g/kWh) PM (<10mg/kWh) can be achieved simultaneously dual fuel (DMDF) highly low-temperature mode. Compared wit...