Electrical resistivity (ER) is a main parameter in the melting processes of glasses. However, its measurement is difficult at high temperatures. In this study the electrical resistivity of different cordierite glass samples in the molten state was measured in the temperature range of 1100˚C to 1550 ˚C using the two-wire method. It was attempted to decrease the electrical resistivity of the glas...

the electrical resistivity of hydrocarbon reservoir rocks is an important parameters in the calculation of water and oil saturation percent in both carbonate and sandstone reservoir rocks.in this regard, most studies have concentrated on the confining  pressure on cementation factor and electrical resistivity in sandstone reservoir rocks. in this study the effect of confining pressure on cement...

electrical resistivity survey is used to explore subsurface layers in hydrology, geology, mining, geotechnical and environmental investigations. the resistivity measurements are normally made by injecting current into the ground through two current electrodes, and measuring the resulting voltage difference at two potential electrodes. electrical resistivity is a function of injection current, m...

Magnetic and Electrical Resistivity Study of Electroless Amorphous Ternary System (Ni-Co-P) show a qualitative dependence of crystalline phases formed during transformation on the annealing temperature and composition. Electrical Resistivity values increases with increase in cobalt content and samples with higher resistivity show lower temperature coefficients. The Initial increase in magnetiza...

Electrical resistivity describes how much a certain material resists electrical flow. Every material has an associated resistivity, ρ, which is constant. Conductors, such as copper have a low resistivity, while insulators, such as glass, have a high resistivity. Resistivity is an important property of any electrical object because it directly relates to the resistance, which relates to Ohm’s la...

geophysical techniques remain the only ways to remotely and non-destructively sense the earth’s near subsurface and as such have the most promising prospect for rapid and accurate detection of underground tunnels. today, electrical resistivity and seismic refraction geophysical methods have been greatly developed to identify structures and underground cavities. in this study, the ability of the...

Engineering ceramics have been widely used in modern industry for their excellent physical and mechanical properties, and they are difficult to machine owing to their high hardness and brittleness. Electrical discharge machining (EDM) is the appropriate process for machining engineering ceramics provided they are electrically conducting. However, the electrical resistivity of the popular engine...

a Laboratoire d’Étude et Modélisation des Environnements Littoraux (Lemel), Université de Bretagne Sud, Centre Yves Coppens, Campus de Tohannic, F-56000, Vannes. b Laboratoire de Statistiques Appliquées de BREtagne Sud (Sabres), Université de Bretagne Sud, Centre Yves Coppens, Campus de Tohannic, F-56000, Vannes. c Laboratoire de Mathématiques et Applications des Mathématiques (LMAM) , Universi...